• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Invert extruder motor direction?

Scheduled Pinned Locked Moved
Firmware installation
3
4
4.9k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    claustro
    last edited by 8 May 2017, 11:11

    I know it is a dumb question , and I could simply turn the motor connector 180 degree, but I would like to understand what I am doing wrong.
    [c];M575 P1 B57600 S1 ; Comms parameters for PanelDue; Machine configuration
    M569 P0 S0 ; Drive 0 goes forwards (change to S0 to reverse it)
    M569 P1 S0 ; Drive 1 goes forwards. (Change if motor goes wrong way. Or just turn the motor connection 180 degrees around..)
    M569 P2 S0 ; Drive 2 goes forwards
    M569 P3 S1 ; Drive 3 goes forwards
    M569 P4 S1 ; Drive 4 goes forwards
    M574 X1 Y2 Z0 S0 ; set endstop configuration (X1 is at MIN end. Y2 is at MAX end. (active high switch = S1, active low switch= S0)
    M667 S1 ; set CoreXY mode[/c]

    I tryed to change M569 P0 S0 to M569 P0 S1 with no luck I tried changing "S " at all the drive with no luck.
    Can someona tell me what I am missing?

    1 Reply Last reply Reply Quote 0
    • undefined
      T3P3Tony administrators
      last edited by 8 May 2017, 11:38

      So the drives are mapped like this by default:
      0 = X
      1 = Y
      2 = Z
      3 = E0
      4 = E1 etc

      Assuming you are referring to extruder 0, you should change the line:

      [[language]]
      M569 P3 S1 
      
      

      To

      [[language]]
      M569 P3 S0
      
      

      www.duet3d.com

      1 Reply Last reply Reply Quote 0
      • undefined
        claustro
        last edited by 9 May 2017, 09:21

        Thank you!

        1 Reply Last reply Reply Quote 0
        • undefined
          stavrosgmtl
          last edited by 18 Nov 2017, 06:36

          I love the duet, saved my butt, thanks!

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA