Inductive sensor as endstop
-
Hello,
i want to connect a LJ8A3-2-Z/AX (10-30VDC / 200mA) as Endstop for Extruder. How can i wire it, so it will work? Endstop gives out only 3.3v -
@Headhunter said in Inductive sensor as endstop:
LJ8A3-2-Z/AX
the *AX sensors are NPN type, meaning its output is essentially 0v. Wire the sensor supply to Vin (10-30v), Gnd to Gnd and output to endstop signal.
-
@Headhunter said in Inductive sensor as endstop:
LJ8A3-2-Z/AX
This should help you out...
https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe