DuetPi DWC differences

madmattco

Has anyone noticed, when using a display on the pi, that the heater messages are showing calls instead of actual text? Also fan rpm section has an added reading.

alt text

Phaedrux

Versions of firmware and DWC please?

madmattco

@Phaedrux

Board: Duet 3 MB6HC (MB6HC)
DSF Version: 2.2.0
Firmware: RepRapFirmware for Duet 3 MB6HC 3.01-RC12 (2020-05-06b1)

Duet Web Control 2.1.7

dc42

Please try version 3.1 of RRF, DSF and DWC and see whether you can still reproduce this.

chas2706

@dc42 said in DuetPi DWC differences:

Please try version 3.1 of RRF, DSF and DWC and see whether you can still reproduce this.

I can reproduce this on RRF 3.01.
If I take my browser to http://duet3.local the DWC is version 2.7 and has the generic heater labels.
If I connect using the ip address of the SBC I get the correct 3.01 DWC version.

chrishamm

@chas2706 Clear your browser cache or try force-refreshing the page by pressing Ctrl+Shift+R in DWC and you should be good to go.

chas2706

@chrishamm said in DuetPi DWC differences:

lear your browser cache or try force-refreshing the page by pressing Ctrl+Shift+R in DWC and you should be good to go.

Thanks for that. Its working fine now.

madmattco

@chrishamm said in DuetPi DWC differences:

@chas2706 Clear your browser cache or try force-refreshing the page by pressing Ctrl+Shift+R in DWC and you should be good to go.

All is well now. Thank you