Constant errors
-
Are you using VIN power to the Duet, USB power, or powering it some other way?
-
BOSSA just wont write.
And USB power
-
USB power alone may be insufficient. Please read the notes on avoiding USB ground loop problems at https://duet3d.dozuki.com/Wiki/USB_ground_loops and try again with VIN power. I assume that you have the 5V regulator on the Duet enabled.
-
Running on VIN and a laptop results in the same problem.
-
Make sure that the PC and the Duet PSU are plugged into the same power distribution block then. Usually it's not a problem if they are not, but occasionally a home has faulty mains wiring.
-
Not gonna risk it, unless duet waranty cowers a 5000€ pc.
-
What i have tried so far.
USB power only: Does not work
USB power only nothing connected exept the USB: Does not work
VIN and USB via a laptop: Does not workUsed the jumppers and reset multiple times.
Nothing works just like i expected.
-
Found the real problem, its a bad solder joint in the sd card slot, multimeter temp probe reads 67C.
-
@Torppa said in Constant errors:
Found the real problem, its a bad soder joint in the sd card slot, multimeter temp probe reads 67C.
What does "soder" mean ?
-
@CaLviNx
https://dictionary.cambridge.org/dictionary/english/nitpicker
Thanks now the world is saved.
English is not my first nor my second language.
