Duet3 Bondtech qr
-
Hello,
I'm trying to change the extruder with Bondtech QR and
I messed up with the motor cable and I don't think I connected the pins correctly.
It makes a bad noise and the firmware tells me:
"Warning: motor phase A may be disconnected reported by driver (s) 3."
The motor moves in the exact direction. Ho controllato se i connettori fanno contatto e mi sembra OK.What can I have done?
Thanks.
-
@Gio Take a look here and scroll down to the part about connecting stepper motors and identifying phases https://duet3d.dozuki.com/Wiki/Choosing_and_connecting_stepper_motors
-
Thanks deckingman, I see it now.