DWC on SBC question

A Former User

@chas2706 if you run launch-dwc it will run the same setting, but if you launch chrome on your own it should be okay?

chas2706

@chas2706 if you run launch-dwc it will run the same setting, but if you launch chrome on your own it should be okay?

I have just tried that and found out that it must be something to do with the chrome browser because it opens in exactly the same fashion, without window icons and you close it by hovering at the top and clicking on the "X" that then appears.

Thanks for your great suggestion though.

A Former User

thats odd; looked like its just being run in full screen mode (F11 on keyboard to toggle?) but seems odd that chrome should launch in full screen mode when not launched by the launch-dwc script that specifies --start-fullscreen

need to set up another Pi soon I'll see if I can download the full image before then

Carlo

@chas2706
You can just place a short cut to the ip address and it will open in a standard window had the same issue...
apparently changing the resolution of the screen and when asked to accept or revert selecting revert has fixed this on some installations may be worth a try but the ip link does work

chas2706

@Carlo said in DWC on SBC question:

@chas2706
You can just place a short cut to the ip address and it will open in a standard window had the same issue...
apparently changing the resolution of the screen and when asked to accept or revert selecting revert has fixed this on some installations may be worth a try but the ip link does work

How do I create a shortcut to the ip address?

Carlo

@chas2706
Open chromium enter the Pi ip 192.xxx.xx.xx
save as a favorite add to tool bar
Also hitting F11 exits full screen mode or touch screen hold finger on screen for couple seconds and Exit full screen with appear

chas2706

@Carlo said in DWC on SBC question:

@chas2706
Open chromium enter the Pi ip 192.xxx.xx.xx
save as a favorite add to tool bar
Also hitting F11 exits full screen mode or touch screen hold finger on screen for couple seconds and Exit full screen with appear

Great. Thanks for that.

A Former User

@Carlo said in DWC on SBC question:

Open chromium enter the Pi ip 192.xxx.xx.xx

as dwc is running on the same host using http://localhost/ would make more sense and not be dependant on user networks which may differ from 192.168/16

if exiting full screen works then find launch-dwc and remove --start-fullscreen. if that doesn't work toggle overscan settings in raspi-config?

chas2706

Thanks both of you.
All sorted now.

A Former User

would you mind sharing, others may find the thread useful later?

chas2706

Just making you aware that when I edited autostart in /etc/xdg/lxsession and put a hash in front of @launch-dwc, when I rebooted I found that DWC still autostarted.
In my duetpi image there is another autostart found in /home/pi/.config/lxsession/LXDE/autostart.
It has exactly the same content as the other one in etc/xdg/lxsession but this MUST be the one the pi is looking at. Hashed out in here and DWC does not autostart.

Also I found a quicker solution to my problem.
In chrome I set the home page as duet3.local/ then in /home/pi/.config/lxsession/LXDE/autostart I hashed out @launch_dwc and added @chromium-browser.
Now on startup I have chrome autostarting in windowed mode and connected to DWC.

chas2706

Here's a copy of the new autostart file:

@lxpanel --profile LXDE
@pcmanfm --desktop --profile LXDE
@xscreensaver -no-splash
@/home/pi/./atx_on.sh
#@launch-dwc
@chromium-browser

Once again, thanks everyone for your help.

A Former User

@chas2706 said in DWC on SBC question:

there is another autostart found in /home/pi/.config/lxsession/LXDE/autostart

huh, interesting, and redundant. wasn't clear from the DuetPi repo, but admittedly not familiar with pi-gen at all.

if fullscreen was the issue I'd lean towards editing launch-dwc and commenting out --start-fullscreen from there, then it works even if you add another user, change windowmanager or whatnot.

sudo sed -i 's/ --start-fullscreen/ #--start-fullscreen/' /usr/bin/launch-dwc should take care of it with a one-liner

chas2706

@bearer said in DWC on SBC question:

@chas2706 said in DWC on SBC question:

there is another autostart found in /home/pi/.config/lxsession/LXDE/autostart

huh, interesting, and redundant. wasn't clear from the DuetPi repo, but admittedly not familiar with pi-gen at all.
if fullscreen was the issue I'd lean towards editing launch-dwc and commenting out --start-fullscreen from there, then it works even if you add another user, change windowmanager or whatnot.
sudo sed -i 's/ --start-fullscreen/ #--start-fullscreen/' /usr/bin/launch-dwc should take care of it with a one-liner

Not so, because @launch-dwc does not have the extra --start-fullscreen parameters in it!

A Former User

it should
https://github.com/Duet3D/DuetPi/blob/master/stage-dsf-gui/00-autologin/files/launch-dwc#L3

(and mine did)

chas2706

Sorry, I was looking in the wrong place!
Going to try that now.

chas2706

You are a star.

Commenting out --start-fullscreen works and has the extra benefit of no page tabs or search bar so you basically get full screen but with the window control buttons.
Cheers.

A Former User

That might be the --app parameter that does that. Interesting learned something new today!

Anyways, glad it worked out!