Toolboard 1LC Heater voltage

[BeosDoc]

Quick question about the toolboard with 24V supplied to the board. I know the fans are 12V, but is the heater voltage at 24V or 12V?

Thanks

[A Former User]

Output Out0 uses Vin while Out1 and Out2 uses 12v.

So with Vin=24v the heater would be 24v.

[BeosDoc]

Great, thank you. I have some toolboards coming and needed to know if I had to order different heaters or not.

[Aquilux]

@T3P3Tony , might want to add this to your documentation, there's no mention of this in either the new or old docs.

[T3P3Tony]

@aquilux thanks, I have added that to the hardware specification and description of connections in the docs:

https://docs.duet3d.com/en/Duet3D_hardware/Duet_3_family/Duet_3_Toolboard_1LC#description-of-connections