RRF Configurator: is it 'pitch' or 'lead'
-
A minor issue I encountered while using the RRF configurator (see screenshot below), should 'pitch' be changed to 'lead' ? (they are not the same)
https://www.thomsonlinear.com/en/support/tips/difference-between-screw-pitch-and-lead
-
that is probably a glitch in the matrix from the days when pitch and lead were the same. (yeah, i guess pitch is correct for a M5 screw, but not necessarily for a multi-start acme screw)
you'll want to use lead, i.e. how much travel one revolution gives you.
-
Thanks @bearer, hopefully whoever can fix it will see this thread.
BTW, this thread also surfaced a glitch in the forums software:
-
@zapta said in RRF Configurator: is it 'pitch' or 'lead':
BTW, this thread also surfaced a glitch in the forums software:
new feautre the other day after the maintenance it seems.
can turn off in your profile settings under notifications.