Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Feature request: please have M303 printing the recomanded M307.

    Scheduled Pinned Locked Moved
    Firmware wishlist
    4
    7
    550
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • zaptaundefined
      zapta
      last edited by

      Upon completion of PID tuning, the M303 prints to the console a summary of the PID coefficients.

      Please print also the recommended M307 command. Some of us do not use configoverride.g and edit the M307 command in config.g (with proper github version control).

      E.g.

      Recommended PID parameters: M307 H0 A283.1 C1724.9 D1.6 V24.1 B0
      
      1 Reply Last reply Reply Quote 0
      • A Former User?
        A Former User
        last edited by

        i think you can just run m307 with no parameters to get it? but its not very intuitive no.

        zaptaundefined 1 Reply Last reply Reply Quote 0
        • zaptaundefined
          zapta @A Former User
          last edited by zapta

          Thanks bearer, I will give it a try next time. This is what the documentations says:

          Alternatively, construct a M307 command with the model parameters and add it to config.g. For example, if after tuning you run M307 H0 and see this:

          M307 H0
          Heater 0 model: gain 199.0, time constant 962.6, dead time 4.5, max PWM 1.00, calibration voltage 12.3
          then you should add the following to config.g to preserve this model:

          M307 H0 A199.0 C962.6 D4.5 V12.3 B0

          Wouldn't it be much easier to just print the recommended M307 command in the first place? 😉

          fcwiltundefined 1 Reply Last reply Reply Quote 0
          • fcwiltundefined
            fcwilt @zapta
            last edited by

            @zapta

            Hi,

            I just use M500 to create the entry in config_override.g and copy and paste from there.

            Frederick

            Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

            zaptaundefined 1 Reply Last reply Reply Quote 0
            • zaptaundefined
              zapta @fcwilt
              last edited by

              Thanks @fcwilt, I saw your post in the other thread, and then you delete config_override.g. Wouldn't it be easier to just copy/paste from the console?

              fcwiltundefined 1 Reply Last reply Reply Quote 0
              • fcwiltundefined
                fcwilt @zapta
                last edited by

                @zapta said in Feature request: please have M303 printing the recomanded M307.:

                Thanks @fcwilt, I saw your post in the other thread, and then you delete config_override.g. Wouldn't it be easier to just copy/paste from the console?

                Yes it would and I have often wondered why it doesn't work as you suggest.

                Frederick

                Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  Moved to the wishlist.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • First post
                    Last post
                  Unless otherwise noted, all forum content is licensed under CC-BY-SA