Filament change macros

[weput]

Hi…

I was wondering if someone could point me to a good macro for filament change...

[demonio669]

In config.g:

M581 E0 S0 T3 C1 ; activate trigger on E0 endstop level change

in NEW file trigger3.g:

M117 Please Change Filament extruder 0
M25

[TYPPA Albert Einstein]

@demonio669:

In config.g:

M581 E0 S0 T3 C1 ; activate trigger on E0 endstop level change

in NEW file trigger3.g:

M117 Please Change Filament extruder 0
M25

Good evening at all … you can add a buzzer to the switch to hear if there is a lack of filament ... being an NO always plays in the presence of the filament ... solutions? Works well already works from Web with the beep but i would like to add a buzzer if I'm not on the computer :))

[dc42]

If you have a PanelDue attached then you can use M300 to make it beep.

[TYPPA Albert Einstein]

@dc42:

If you have a PanelDue attached then you can use M300 to make it beep.

Not have PanelDue if use Fan3?