Getting WiFi to connect
-
I will have new beta firmware very soon, with rewritten WiFi code. I hope that will fix it. Look out for the announcement of firmware 1.19 in beta.
-
Thank you David for the update, I have got it to work using my iphone as a hotspot, but can not connect it to my works infrastructure (no pages load although I get server response code 200), although the I.T dept. say there are no restrictions in place, I guess they are missing something.
Occasionally I still get disconnections and board resets, here is what M122 outputs:SENDING:M122
=== Diagnostics ===
Used output buffers: 1 of 32 (2 max)
=== Platform ===
Static ram used: 28556
Dynamic ram used: 79644
Recycled dynamic ram: 2392
Stack ram used: 3680 current, 4504 maximum
Never used ram: 15976
Last reset 00:00:12 ago, cause: power up
Last software reset code 0x0031, HFSR 0x40000000, CFSR 0x00008200, ICSR 0x0440f803, BFAR 0x447a0000, SP 0x2001fe5c
Stack: 0041a479 0041db7e 81000000 2ece0000 40279127 d758f099 bfc253a9 fffffc03 0042f7ad 004327e4 61000200 00008e4e 00000014 00000000 2000a448 00000001 0041f919 00000000
Spinning module during software reset: Network, available RAM 15652 bytes (slot 3)
Error status: 0
[ERROR] Error status: 0Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms
MCU temperature: min 19.1, current 22.1, max 24.2
Supply voltage: min 0.4, current 0.7, max 0.9, under voltage events: 0, over voltage events: 0
Driver 0: ok
Driver 1: ok
Driver 2: ok
Driver 3: ok
Driver 4: ok
Date/time: 1970-01-01 00:00:00
Slowest main loop (seconds): 0.002416; fastest: 0.000032
=== Move ===
MaxReps: 0, StepErrors: 0, MaxWait: 0ms, Underruns: 0, 0
Scheduled moves: 0, completed moves: 0
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
Probe change coordinates:
=== Heat ===
Bed heater = 0, chamber heater = -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
Code queue is empty.
Network state is changing mode
WiFi module is trying to connect
SPI underruns 1, overruns 0
WiFi firmware version 1.19-alpha1
WiFi MAC address 5c:cf:7f:37:8b:19
WiFi Vcc 3.11, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 9128
HTTP sessions: 0 of 8
FTP state 0
Telnet state 0
Wifi module is idle -
Hi Matthew,
Thanks for trying that version.
Your reset data indicates a firmware error, but I no longer have the intermediate files I need from the 1.19alpha1 build to track it down. Please can you upgrade your DuetWiFiFirmware to 1.19alpha2 and see if you still get the resets when it is connected to your iPhone. If so then post the M122 report again. See https://github.com/dc42/RepRapFirmware/blob/dev/WHATS_NEW.md for 1.19alpha2 upgrade notes.
I expect to have an update to the DuetWiFiServer code soon, and when I have released that it may be worth seeing if the Duet can connect to your works network again.
-
I am also having issues wit\h DuetWifi. I had an issue where the firmware got corrupted while updating firmware 1.18. The duet was locked up and couldnt even connect using USB. I used Sam BL to reinstall 1.18 but could not get the wifi running. I updated to 1.19 Alph and followed the instructions for installation. It worked. When i tried again after another print the wifi could not be connected again. This time nothing I do will allow me to connect. I can still connect over USB and the display still works
This is what i get from the diagnostics
SENDING:M122
=== Diagnostics ===
Used output buffers: 1 of 32 (8 max)
=== Platform ===
Static ram used: 28556
Dynamic ram used: 79644
Recycled dynamic ram: 2392
Stack ram used: 3680 current, 4892 maximum
Never used ram: 15588
Last reset 00:01:20 ago, cause: power up
Last software reset code 0x1003, HFSR 0x00000000, CFSR 0x00000000, ICSR 0x0440f80f, BFAR 0xe000ed38, SP 0xffffffff
Spinning module during software reset: GCodes, available RAM 15876 bytes (slot 3)
Error status: 0
[ERROR] Error status: 0Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms
MCU temperature: min 36.4, current 37.9, max 39.6
Supply voltage: min 12.4, current 12.4, max 12.5, under voltage events: 0, over voltage events: 0
Driver 0: standstill
Driver 1: standstill
Driver 2: standstill
Driver 3: standstill
Driver 4: standstill
Date/time: 1970-01-01 00:00:00
Slowest main loop (seconds): 0.004684; fastest: 0.000137
=== Move ===
MaxReps: 0, StepErrors: 0, MaxWait: 0ms, Underruns: 0, 0
Scheduled moves: 0, completed moves: 0
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
Probe change coordinates:
=== Heat ===
Bed heater = 0, chamber heater = -1
Heater 0 is on, I-accum = 0.0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
Code queue is empty.
Network state is running
WiFi module is idle
SPI underruns 3, overruns 0
WiFi firmware version 1.19-alpha1
WiFi MAC address 18:fe:34:cb:01:c9
WiFi Vcc 3.06, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 9128
HTTP sessions: 0 of 8
FTP state 0
Telnet state 0M122
SENDING:M122
=== Diagnostics ===
Used output buffers: 1 of 32 (8 max)
=== Platform ===
Static ram used: 28556
Dynamic ram used: 79644
Recycled dynamic ram: 2392
Stack ram used: 3680 current, 4988 maximum
Never used ram: 15492
Last reset 00:01:22 ago, cause: power up
Last software reset code 0x1003, HFSR 0x00000000, CFSR 0x00000000, ICSR 0x0440f80f, BFAR 0xe000ed38, SP 0xffffffff
Spinning module during software reset: GCodes, available RAM 15876 bytes (slot 3)
Error status: 0
[ERROR] Error status: 0Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms
MCU temperature: min 36.7, current 38.4, max 39.1
Supply voltage: min 12.4, current 12.5, max 12.5, under voltage events: 0, over voltage events: 0
Driver 0: standstill
Driver 1: standstill
Driver 2: standstill
Driver 3: standstill
Driver 4: standstill
Date/time: 1970-01-01 00:00:00
Slowest main loop (seconds): 0.004723; fastest: 0.000137
=== Move ===
MaxReps: 0, StepErrors: 0, MaxWait: 0ms, Underruns: 0, 0
Scheduled moves: 0, completed moves: 0
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
Probe change coordinates:
=== Heat ===
Bed heater = 0, chamber heater = -1
Heater 0 is on, I-accum = 0.0
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 2 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is ready with "M122" in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
Code queue is empty.
Network state is running
WiFi module is idle
SPI underruns 4, overruns 0
WiFi firmware version 1.19-alpha1
WiFi MAC address 18:fe:34:cb:01:c9
WiFi Vcc 3.06, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 9128
HTTP sessions: 0 of 8
FTP state 0
Telnet state 0 -
Have you tried sending M552 S-1 followed by M552 S1 to reset and restart the WiFi module?
I hope to release an update to DuetWiFiServer later today.
-
Still getting errors and resets, using the latest release
Last software reset code 0x1001, HFSR 0x00000000, CFSR 0x00000000, ICSR 0x0440f80f, BFAR 0xe000ed38, SP 0xffffffff
Spinning module during software reset: Network, available RAM 15956 bytes (slot 0)HTTP/1.1 500 overflow
Connection: closeI seem to be getting a step closer, at least I can request and get served html404.html
-
Still getting errors and resets, using the latest release
Last software reset code 0x1001, HFSR 0x00000000, CFSR 0x00000000, ICSR 0x0440f80f, BFAR 0xe000ed38, SP 0xffffffff
Spinning module during software reset: Network, available RAM 15956 bytes (slot 0)HTTP/1.1 500 overflow
Connection: closeI seem to be getting a step closer, at least I can request and get served html404.html
Thanks. Please let me know if you get any resets with a software reset code other than 0x1001, like the one you reported before.
-
Last reset 00:00:22 ago, cause: reset button or watchdog
Last software reset code 0x0031, HFSR 0x40000000, CFSR 0x00008200, ICSR 0x0440f803, BFAR 0x0a9d0a9c, SP 0x2001fe5c
Stack: 0041ae99 0041e5b2 81000000 00000000 ffffffe9 2000a540 00000001 00000001 00000002 2001fee8 0041af53 0041af9a 21000000 00000000 ffffffe9 2000b868 00000001 00000000
Spinning module during software reset: Network, available RAM 15652 bytes (slot 2)Webserver: rejecting message with: not found
What is not found? Am I missing a SD card file? Everything has been extracted to /www
Also WiFi firmware version reports 1.19-alpha1 not alpha2 but has been upgraded.
Thank you for your continued effort.
-
Thanks for your report. That gives me a very good idea of what went wrong.
The firmware for the WiFi module (DuetWiFiServer) is still at 1.19alpha1, it's only DuetWiFiFirmware that is at 1.19alpha2.
-
Firmware Name: RepRapFirmware for Duet WiFi
Firmware Electronics: Duet WiFi 1.0
Firmware Version: 1.19alpha3 (2017-05-09)
WiFi Server Version: 1.19-alpha1
Web Interface Version: 1.16Using an iphone as a hotspot I can connect for a few seconds via DWC, then I get: An AJAX error has been reported….....
08:29 22/05/2017
Last software reset code 0x1001, HFSR 0x00000000, CFSR 0x00000000, ICSR 0x0043380f, BFAR 0xe000ed38, SP 0xffffffff
Spinning module during software reset: Network, available RAM 8868 bytes (slot 4)08:31 22/05/2017
Last software reset code 0x0031, HFSR 0x40000000, CFSR 0x00008200, ICSR 0x0440f803, BFAR 0x447a0000, SP 0x2001fe5c
Stack: 0041ae99 0041e5b2 81000000 80000000 bfd802a3 e974b355 3facf963 fffffc02 00430121 004334aa 81008a00 000002f3 09c0b000 0042fed2 01000000 2000a540 00000001 00000000
Spinning module during software reset: Network, available RAM 15652 bytes (slot 0)
Error status: 008:36 22/05/2017
Last software reset code 0x1031, HFSR 0x40000000, CFSR 0x00008200, ICSR 0x0440f803, BFAR 0x505c0f91, SP 0x2001fe44
Stack: 0041a227 004350a0 21000000 400c0000 200065c8 00000000 0041a343 0041a348 81000000 0000000b 00000000 00000000 ffffffe9 2565c18a 3e05f204 00000000 00430030 000002e2
Spinning module during software reset: Network, available RAM 15652 bytes (slot 1) -
Please switch to 1.19beta1 and try again. See https://www.duet3d.com/forum/thread.php?id=1620 for upgrade instructions.
