Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Filament configuration - ABS

    Scheduled Pinned Locked Moved Solved
    General Discussion
    3
    14
    557
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • kroybalundefined
      kroybal
      last edited by

      @Phaedrux

      It is a Duet 3 on stand-alone mode (No SBC).
      M115 returns:

      10/6/2020, 6:56:31 PM M115
      FIRMWARE_NAME: RepRapFirmware for Duet 3 MB6HC FIRMWARE_VERSION: 3.01-RC9 ELECTRONICS: Duet 3 MB6HC v1.01 or later FIRMWARE_DATE: 2020-04-21b1

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        It looks like you are still on an old firmware version. Please try updating with this method.

        https://duet3d.dozuki.com/Wiki/Getting_Started_With_Duet_3#Section_Updating_Duet_3_from_RRF3_0_Beta_12_to_3_0_Final_via_DWC

        Z-Bot CoreXY Build | Thingiverse Profile

        kroybalundefined 1 Reply Last reply Reply Quote 0
        • kroybalundefined
          kroybal @Phaedrux
          last edited by kroybal

          @Phaedrux Following the method, the DWC did not automatically detect the files additionally, when I did a M115 command It appears as though I downgraded.

          I attempted the procedure again, this time successfully.

          1 Reply Last reply Reply Quote 0
          • Phaedruxundefined
            Phaedrux Moderator
            last edited by

            Does the filament function work correctly now on 3.1.1?

            Z-Bot CoreXY Build | Thingiverse Profile

            1 Reply Last reply Reply Quote 0
            • kroybalundefined
              kroybal
              last edited by

              @Phaedrux After the firmware update, It still does not register that Ive added filament. So far the slicer is handling the filament properties as specified in its configuration.

              However, I would still love to add that functionality because this is intended to be used at a production level and will likely experience many filament changes per client specification.

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                @kroybal said in Filament configuration - ABS:

                It still does not register that Ive added filament.

                I think the problem is that you've named the macro ABS when it should be a folder in filaments called ABS and then inside that folder would have the various macros for load unload and config.

                https://duet3d.dozuki.com/Wiki/Gcode#Section_M701_Load_filament

                Z-Bot CoreXY Build | Thingiverse Profile

                kroybalundefined 1 Reply Last reply Reply Quote 0
                • kroybalundefined
                  kroybal @Phaedrux
                  last edited by

                  @Phaedrux Awesome, appreciate the guidance M701 is new to me.

                  fcwiltundefined 1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    M701 and M702 are what get called when you use load and unload in DWC.

                    How exactly are you creating the filament entries? You linked the documentation in your first post so I assumed you were using DWC to add the filaments and then edit the load and unload macros.

                    Z-Bot CoreXY Build | Thingiverse Profile

                    1 Reply Last reply Reply Quote 0
                    • fcwiltundefined
                      fcwilt @kroybal
                      last edited by

                      Add Filament Button.png

                      When you access the page where the filaments are listed you should see something like above:

                      When you click "NEW FILAMENT" it will ask you for a NAME and then create a FOLDER with that NAME and inside the FOLDER it will create the three files you need but the ones created do nothing, you need to edit them as desired.

                      The files that are created are CONFIG.G LOAD.G and UNLOAD.g

                      Frederick

                      Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                      kroybalundefined 1 Reply Last reply Reply Quote 2
                      • kroybalundefined
                        kroybal @fcwilt
                        last edited by

                        @fcwilt @Phaedrux Thanks for the clarification guys. I got filaments!

                        1 Reply Last reply Reply Quote 1
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA