Mosaic Palette on a Corexy

[MartinNYHC]

Anybody out there who is using a Mosaic Palette on a Corexy printer? I'm wondering what's the best way to attach it to the hotend because I think the tube is too short for the axis movements.

Thanks, Martin

[Phaedrux]

I had to set up a shelf to hold the Palette close to the top of the printer. Then the long tube included with the Palette was able to reach the printable area more or less. (at least where it counts.)

My shelf was just a stack of boxes on a stool.

[MartinNYHC]

I mounted it to the wall directly over the printer. Medium size tube will work