Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login
    1. Home
    2. MartinNYHC
    • Profile
    • Following 0
    • Followers 1
    • Topics 70
    • Posts 417
    • Best 25
    • Controversial 0
    • Groups 0

    MartinNYHC

    @MartinNYHC

    30
    Reputation
    33
    Profile views
    417
    Posts
    1
    Followers
    0
    Following
    Joined Last Online

    MartinNYHC Unfollow Follow

    Best posts made by MartinNYHC

    • Third party plugin documentation

      Is there already a documentation about the new plugin system? I'm interested to know how to implement a new plugin.

      posted in Duet Web Control wishlist
      MartinNYHCundefined
      MartinNYHC
    • RE: Issues with pressure advance since RRF 3.4

      After synchronizing with @Argo what already has been tested and what not I wanted to rule out that the problem is caused by the 1LC toolboard.

      IMG_0986.jpeg

      Top: E stepper comnnected to a Duet3 3HC
      Bottom: E stepper connected to 1LC

      So at least we are now sure that it is not related to the 1LC.

      My setup:

      Same printer as @Argo
      Duet3 6HC with 1LC and SBC running RRF 3.4.3
      LGX extruder with Rapido HF hotend.

      config.g

      	; General preferences
      M111 S0                     							; Debugging off
      G21                         							; Work in millimetres
      G90                         							; Send absolute coordinates...
      M83                         							; ...but relative extruder moves
      M669 K1                     							; Select CoreXY mode
      M564 S1 H1                  							; Forbid axis movements when not homed
      G4 S1   												; wait for expansion boards to start
      
      ; Drives
      
      ; --- Z Drive map ---
      ;     _______
      ;    | 3 | 4 |
      ;    | ----- |
      ;    | 2 | 5 |
      ;     -------
      ;      front
      ;
      
      ; Drive directions
      M569 P0 S1 												; A (X)
      M569 P1 S1 												; B (Y)
      M569 P2 S1 												; Z1
      M569 P3 S0 												; Z2
      M569 P4 S1 												; Z3
      M569 P5 S0 												; Z4
      M569 P121.0 S1 											; E
      
      ; Motor mapping and steps per mm
      M584 X1 Y0 Z2:3:4:5 E121.0
      M350 X16 Y16 Z16 E16 I1         						; Use 1/16 microstepping with interpolation everywhere
      M92 X80 Y80 Z400 E414.92683
      
      ; Drive currents
      M906 X1500 Y1500 Z1500 E650     						; XYZ and E current
      M906 I30                        						; Idle current percentage
      M84 S300                        						; Idle timeout
      
      ; Accelerations and speed
      ;M566 X600 Y600 Z60 E8000								; Set maximum instantaneous speed changes (mm/min)
      M566 X400 Y400 Z60 E8000								; Set maximum instantaneous speed changes (mm/min)
      M203 X30000 Y30000 Z3000 E15000 						; Set maximum speeds (mm/min)
      M201 X10000 Y10000 Z250 E1800     						; Set maximum accelerations (mm/s^2) 
      M204 P4000 T5000
      
      ; Accelerometer
      ;M955 P121.0 I05										; set address and orientation of tool board
      
      ; PA, DAA
      ;M572 D0 S0.05
      M572 D0 S0.035
      M593 P"zvdd" F35.2
      
      ; Axis travel limits
      M208 X5 Y-5 Z0 S1               						; Set axis minima
      M208 X350 Y350 Z375 S0          						; Set axis maxima
      
      ; Endstops
      M574 X2 S1 P"^io1.in"          							; Xmax endstop
      M574 Y2 S1 P"^io2.in"          							; Ymax endstop
      ;M574 Z1 S1 P"^io3.in"                                   ; Z endstop switch
      M574 Z1 P"nil" 										; No endstop
      
      ; Z probes
      ;M558 K0 P8 C"121.io0.in" I1 H2.5 F250 T18000 A31 S0.0035 R0.2  ; set Z probe type to switch and the dive height + speeds
      ;G31 K0 P500 X0 Y25 Z8.74
      ;M558 K1 P8 C"io3.in" I1 H2 F240 T18000 A31 S0.0035 R0.2 ; set Z probe type to switch and the dive height + speeds
      ;G31 K1 P500 X0 Y0 Z0			                          ; set Z probe trigger value, offset and trigger height -0.8
      
      ; Filament Sensor
      ;M591 D0 P7 C"121.io2.in" S1
      
      ; Bed leveling
      M671 X-53:-53:400:400 Y-5:420:420:-5 S20      			; Define Z belts locations (Front_Left, Back_Left, Back_Right, Front_Right)
      ;M557 X20:335 Y20:330 P5:5
      M557 X120:235 Y120:230 P2:2
      
      ; Bed heater
      M308 S0 P"temp0" Y"thermistor" T100000 B3950             ; configure sensor 0 as thermistor
      M950 H0 C"out1" T0                                       ; create bed heater output
      M307 H0 B0 S1.00                                         ; disable bang-bang mode for the bed heater and set PWM limit
      M140 H0                                                  ; map heated bed to heater 0
      M143 H0 S120                                             ; set temperature limit for heater
      
      ; Hotend heater
      ;M308 S1 P"121.temp1" Y"pt1000"
      M308 S1 P"121.temp1" A"Heater 1" Y"thermistor" T100000 B4725 C7.06e-8
      M950 H1 C"121.out0" T1
      ;M950 H1 C"out2" T1
      M307 H1 B0 S1       		                             ; disable bang-bang mode for heater  and set PWM limit
      M143 H1 S300                                             ; Set temperature limit for heater
      
      ; Chamber Thermistor
      M308 S2 P"temp1" A"Chamber" Y"thermistor" T100000 B3950  ; configure sensor 2 as thermistor
      
      ; MCU sensors
      M308 S3 Y"mcu-temp" A"MCU"
      M308 S4 Y"drivers" A"Drivers"
      M912 P0 S-13					                       	 ; MCU temp calibration
      
      ; Fans
      ;M950 F0 C"121.out1" Q10000                              ; part cooling fan # old Sunon
      M950 F0 C"121.out1"			                             ; part cooling fan # new Gsdtime
      M106 P0 C"Bed" S0 H-1									 ; part cooling fan
      M950 F1 C"121.out2"                                      ; hotend fan
      M106 P1 C"Hotend" L0.70 X0.70 H1 T70 S0.70				 ; hotend fan
      M950 F2 C"out7" Q10                                      ; air filter fan
      M106 P2 C"Filter" S0 H-1 B0.2							 ; air filter fan
      M950 F3 C"out4" Q24000                                   ; electronics bay left side
      M106 P3 S0.75 H-1 B1 C"Bay"	                             ; electronics bay left side 
      ;M950 F4 C"1.out3" Q24000                                 ; electronics bay right side
      ;M106 P4 S0.75 H-1 B1 C"Bay Right"                           ; electronics bay right side
      M950 F5 C"out5"	                                    	 ; sbc fan
      M106 P5 S0.2 H-1 C"SBC"                         		 ; sbc fan
      M950 F6 C"out6"							 			   	 ; chamber light
      M106 P6 S1 H-1 C"Light"									 ; chamber light
      
      ; Tools
      M563 P0 S"Hotend" D0 H1 F0                               ; define tool 0
      ;G10 P0 X0 Y0 Z-2.75
      G10 P0 X0 Y0 Z0
      G10 P0 R0 S0                                             ; set initial tool 0 active and standby temperatures to 0C
      
      ; Enable debugging via USB
      ;M111 S1 P0												; Platform
      ;M111 S1 P1												; Network
      ;M111 S1 P2												; Webserver
      ;M111 S1 P3												; GCodes
      ;M111 S1 P4												; Move
      ;M111 S1 P5												; Heat
      ;M111 S1 P6												; DAA
      ;M111 S1 P7												; Roland
      ;M111 S1 P8												; Scanner
      ;M111 S1 P9												; PrintMonitor
      ;M111 S1 P10											; Storage
      ;M111 S1 P11											; PortControl
      ;M111 S1 P12											; DuetExpansion
      ;M111 S1 P13											; FilamentSensor
      ;M111 S1 P14 											; Wifi
      ;M111 S1 P15											; Display
      ;M111 S1 P16											; LinuxInterface
      ;M111 S1 P17											; CAN
      
      ; Neopixel
      M150 X3 Q3000000           ; set LED type to NeoPixel and set SPI frequency to 3MHz
      M150 W255 P255 Y255 S3 F0
      
      ; Misc
      M575 P1 S1 B115200	                					; enable support for PanelDue
      M501                                					; load config-override.g
      M302 P0													; disallow cold extrudes
      T0                                  					; select tool 0
      
      ; Auto Z
      M98 P"/macros/autoz/edit_me.g" ; load your settings for autoz with klicky probe
      M400
      M98 P"/macros/autoz/scripts/autoz_globals.g" ; load autoz framework for klicky probe
      M400
      
      ; ERCF
      ;M98 P"0:/macros/sys/ercf/lib/init.g"
      
      

      Gcode file

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • RE: Duet3 Neopixel Wiring

      @Nuramori said in Duet3 Neopixel Wiring:

      @MartinNYHC

      I have mine working on my BLV with the duet3. It’s actually easier than it was with the duet2. I can share details and pictures in a bit if you’re interested.

      Yes please πŸ˜‰

      posted in Duet Hardware and wiring
      MartinNYHCundefined
      MartinNYHC
    • RE: Duet 3 6HC - Firmware Upgrade - Flash locked

      Here we go....

      bossac compiled for MacOS Mojave

      posted in Firmware installation
      MartinNYHCundefined
      MartinNYHC
    • RE: Issues with pressure advance since RRF 3.4

      @gloomyandy My extruder is clogged πŸ€• Will do the test prints tomorrow.

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • RE: Duet/RRF Mosaic Palette and Octoprint

      @Phaedrux Yes, my final way for the future is definitely a tool changer.

      At least I got it to run. I'm doing the pre gcode via DWC and then start the main print via Octoprint. I had to block M503 in Octoprint otherwise it stucks in status "starting".

      The "slow down during splices" plugin feature seems to work. I printed @100mm and during splices @50mm without any problems.

      posted in 3D Printing General Chat
      MartinNYHCundefined
      MartinNYHC
    • RE: Question for Nodejs guys

      That's what I was looking for. Very useful. Thx mate!

      posted in DSF Development
      MartinNYHCundefined
      MartinNYHC
    • RE: RRF 3.2: Failed to start Duet Control Server

      My fault. I still had an empty SD card inserted into the Duet 3 πŸ€•

      Sorry for that.

      posted in Firmware installation
      MartinNYHCundefined
      MartinNYHC
    • RE: Duet 2 or 3 for Corexy

      Thanks for pointing out, but I bought a Duet 3 6HC today πŸ˜‰

      Now I need to wait for the ordered frame parts. Did I mention that I hate waiting at all? πŸ˜‹

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • automesh GUI app for post-processing

      To whom it may concern πŸ˜‰ First Beta version.

      https://github.com/maziggy/Reprap-Automesh

      main.png

      result.png

      posted in 3D Printing General Chat
      MartinNYHCundefined
      MartinNYHC

    Latest posts made by MartinNYHC

    • RE: Issues with pressure advance since RRF 3.4

      @gloomyandy My extruder is clogged πŸ€• Will do the test prints tomorrow.

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • RE: Issues with pressure advance since RRF 3.4

      @Argo I also had this issue before I switched from a Mosquito Magnum to Rapido πŸ˜‰

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • RE: Issues with pressure advance since RRF 3.4

      @gloomyandy I already tried lots of different settings within the last few months but that doesn't change anything. The same applies to the RRF version - same results as @Argo starting with 3.4.

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • RE: Issues with pressure advance since RRF 3.4

      After synchronizing with @Argo what already has been tested and what not I wanted to rule out that the problem is caused by the 1LC toolboard.

      IMG_0986.jpeg

      Top: E stepper comnnected to a Duet3 3HC
      Bottom: E stepper connected to 1LC

      So at least we are now sure that it is not related to the 1LC.

      My setup:

      Same printer as @Argo
      Duet3 6HC with 1LC and SBC running RRF 3.4.3
      LGX extruder with Rapido HF hotend.

      config.g

      	; General preferences
      M111 S0                     							; Debugging off
      G21                         							; Work in millimetres
      G90                         							; Send absolute coordinates...
      M83                         							; ...but relative extruder moves
      M669 K1                     							; Select CoreXY mode
      M564 S1 H1                  							; Forbid axis movements when not homed
      G4 S1   												; wait for expansion boards to start
      
      ; Drives
      
      ; --- Z Drive map ---
      ;     _______
      ;    | 3 | 4 |
      ;    | ----- |
      ;    | 2 | 5 |
      ;     -------
      ;      front
      ;
      
      ; Drive directions
      M569 P0 S1 												; A (X)
      M569 P1 S1 												; B (Y)
      M569 P2 S1 												; Z1
      M569 P3 S0 												; Z2
      M569 P4 S1 												; Z3
      M569 P5 S0 												; Z4
      M569 P121.0 S1 											; E
      
      ; Motor mapping and steps per mm
      M584 X1 Y0 Z2:3:4:5 E121.0
      M350 X16 Y16 Z16 E16 I1         						; Use 1/16 microstepping with interpolation everywhere
      M92 X80 Y80 Z400 E414.92683
      
      ; Drive currents
      M906 X1500 Y1500 Z1500 E650     						; XYZ and E current
      M906 I30                        						; Idle current percentage
      M84 S300                        						; Idle timeout
      
      ; Accelerations and speed
      ;M566 X600 Y600 Z60 E8000								; Set maximum instantaneous speed changes (mm/min)
      M566 X400 Y400 Z60 E8000								; Set maximum instantaneous speed changes (mm/min)
      M203 X30000 Y30000 Z3000 E15000 						; Set maximum speeds (mm/min)
      M201 X10000 Y10000 Z250 E1800     						; Set maximum accelerations (mm/s^2) 
      M204 P4000 T5000
      
      ; Accelerometer
      ;M955 P121.0 I05										; set address and orientation of tool board
      
      ; PA, DAA
      ;M572 D0 S0.05
      M572 D0 S0.035
      M593 P"zvdd" F35.2
      
      ; Axis travel limits
      M208 X5 Y-5 Z0 S1               						; Set axis minima
      M208 X350 Y350 Z375 S0          						; Set axis maxima
      
      ; Endstops
      M574 X2 S1 P"^io1.in"          							; Xmax endstop
      M574 Y2 S1 P"^io2.in"          							; Ymax endstop
      ;M574 Z1 S1 P"^io3.in"                                   ; Z endstop switch
      M574 Z1 P"nil" 										; No endstop
      
      ; Z probes
      ;M558 K0 P8 C"121.io0.in" I1 H2.5 F250 T18000 A31 S0.0035 R0.2  ; set Z probe type to switch and the dive height + speeds
      ;G31 K0 P500 X0 Y25 Z8.74
      ;M558 K1 P8 C"io3.in" I1 H2 F240 T18000 A31 S0.0035 R0.2 ; set Z probe type to switch and the dive height + speeds
      ;G31 K1 P500 X0 Y0 Z0			                          ; set Z probe trigger value, offset and trigger height -0.8
      
      ; Filament Sensor
      ;M591 D0 P7 C"121.io2.in" S1
      
      ; Bed leveling
      M671 X-53:-53:400:400 Y-5:420:420:-5 S20      			; Define Z belts locations (Front_Left, Back_Left, Back_Right, Front_Right)
      ;M557 X20:335 Y20:330 P5:5
      M557 X120:235 Y120:230 P2:2
      
      ; Bed heater
      M308 S0 P"temp0" Y"thermistor" T100000 B3950             ; configure sensor 0 as thermistor
      M950 H0 C"out1" T0                                       ; create bed heater output
      M307 H0 B0 S1.00                                         ; disable bang-bang mode for the bed heater and set PWM limit
      M140 H0                                                  ; map heated bed to heater 0
      M143 H0 S120                                             ; set temperature limit for heater
      
      ; Hotend heater
      ;M308 S1 P"121.temp1" Y"pt1000"
      M308 S1 P"121.temp1" A"Heater 1" Y"thermistor" T100000 B4725 C7.06e-8
      M950 H1 C"121.out0" T1
      ;M950 H1 C"out2" T1
      M307 H1 B0 S1       		                             ; disable bang-bang mode for heater  and set PWM limit
      M143 H1 S300                                             ; Set temperature limit for heater
      
      ; Chamber Thermistor
      M308 S2 P"temp1" A"Chamber" Y"thermistor" T100000 B3950  ; configure sensor 2 as thermistor
      
      ; MCU sensors
      M308 S3 Y"mcu-temp" A"MCU"
      M308 S4 Y"drivers" A"Drivers"
      M912 P0 S-13					                       	 ; MCU temp calibration
      
      ; Fans
      ;M950 F0 C"121.out1" Q10000                              ; part cooling fan # old Sunon
      M950 F0 C"121.out1"			                             ; part cooling fan # new Gsdtime
      M106 P0 C"Bed" S0 H-1									 ; part cooling fan
      M950 F1 C"121.out2"                                      ; hotend fan
      M106 P1 C"Hotend" L0.70 X0.70 H1 T70 S0.70				 ; hotend fan
      M950 F2 C"out7" Q10                                      ; air filter fan
      M106 P2 C"Filter" S0 H-1 B0.2							 ; air filter fan
      M950 F3 C"out4" Q24000                                   ; electronics bay left side
      M106 P3 S0.75 H-1 B1 C"Bay"	                             ; electronics bay left side 
      ;M950 F4 C"1.out3" Q24000                                 ; electronics bay right side
      ;M106 P4 S0.75 H-1 B1 C"Bay Right"                           ; electronics bay right side
      M950 F5 C"out5"	                                    	 ; sbc fan
      M106 P5 S0.2 H-1 C"SBC"                         		 ; sbc fan
      M950 F6 C"out6"							 			   	 ; chamber light
      M106 P6 S1 H-1 C"Light"									 ; chamber light
      
      ; Tools
      M563 P0 S"Hotend" D0 H1 F0                               ; define tool 0
      ;G10 P0 X0 Y0 Z-2.75
      G10 P0 X0 Y0 Z0
      G10 P0 R0 S0                                             ; set initial tool 0 active and standby temperatures to 0C
      
      ; Enable debugging via USB
      ;M111 S1 P0												; Platform
      ;M111 S1 P1												; Network
      ;M111 S1 P2												; Webserver
      ;M111 S1 P3												; GCodes
      ;M111 S1 P4												; Move
      ;M111 S1 P5												; Heat
      ;M111 S1 P6												; DAA
      ;M111 S1 P7												; Roland
      ;M111 S1 P8												; Scanner
      ;M111 S1 P9												; PrintMonitor
      ;M111 S1 P10											; Storage
      ;M111 S1 P11											; PortControl
      ;M111 S1 P12											; DuetExpansion
      ;M111 S1 P13											; FilamentSensor
      ;M111 S1 P14 											; Wifi
      ;M111 S1 P15											; Display
      ;M111 S1 P16											; LinuxInterface
      ;M111 S1 P17											; CAN
      
      ; Neopixel
      M150 X3 Q3000000           ; set LED type to NeoPixel and set SPI frequency to 3MHz
      M150 W255 P255 Y255 S3 F0
      
      ; Misc
      M575 P1 S1 B115200	                					; enable support for PanelDue
      M501                                					; load config-override.g
      M302 P0													; disallow cold extrudes
      T0                                  					; select tool 0
      
      ; Auto Z
      M98 P"/macros/autoz/edit_me.g" ; load your settings for autoz with klicky probe
      M400
      M98 P"/macros/autoz/scripts/autoz_globals.g" ; load autoz framework for klicky probe
      M400
      
      ; ERCF
      ;M98 P"0:/macros/sys/ercf/lib/init.g"
      
      

      Gcode file

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • RE: Issues with pressure advance since RRF 3.4

      Same bulging here.

      6HC + 1LC with RRF 3.4.3 and PA 0.035.

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • RE: Duet 1LC STEP file not matching v1.3

      IMG_0909.jpeg
      1659201816766-screenshot-2022-07-30-at-19.21.03.png

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • Duet 1LC STEP file not matching v1.3

      The step file for 1LC version 1.3 doesn't match.

      https://github.com/Duet3D/Duet3-Toolboard-1LC/blob/master/Toolboard_1LC_v1.3/Duet3_TB_1LC_v1.3_STEP.zip

      Screenshot 2022-07-30 at 19.21.03.png

      posted in General Discussion
      MartinNYHCundefined
      MartinNYHC
    • RE: 1LC toolboard no longer found

      Just connected a brand new 1LC toolboard v1.2 and getting the same error.

      posted in Duet Hardware and wiring
      MartinNYHCundefined
      MartinNYHC
    • 1LC toolboard no longer found

      When I switched on one of my printers this morning, all of a sudden the 1LC toolboard is no longer recognized.

      Screenshot 2022-04-27 at 08.15.10.png

      Already did a factory default reset of the toolboard and checked the cabling. Yesterday evening it still was working and there are no changed to the configuration.

      Duet3 6HC --CAN--> Duet3 3HC --CAN--> 1LC. All running RRF 3.4.0.

      Any ideas please?

      posted in Duet Hardware and wiring
      MartinNYHCundefined
      MartinNYHC
    • RE: Duet2 + SBC + Additional drivers

      @jay_s_uk NOW i got it πŸ™‚ I think that's the way for me.

      posted in Duet Hardware and wiring
      MartinNYHCundefined
      MartinNYHC