Benchy
-
Is it possable to print a benchy without a cooling fan
-
Probably, but it's designed to test overhangs and bridging, so it won't look great.
-
Ive got the bow curling up and both stern corners
Ive got to find a plausible fan arrangment that will fit yet. Any suggestions??
Im concerned about melting it also given the mosquito hotend -
without part cooling or without any fan?
you need the hotend cooling fan or you could clog the hotend.
-
Just the part cooling fan i cant fine one that fits ... thought someone might be able to point out one that would fit universally
Ive already run a couple printe extruder and hotend are greate in using a bmg - m and mosquito magnum hotend .. the ones i see are to close to the hotend "in my opinion" and most wont fit my layout
Im hopping nit to have to design one i kike the fang style or nat e a larger ring type -
ziggymanpopo 11 Nov 2020, 03:41
Just the part cooling fan. I
cant fine one that fits ... Thought someone might be able to point out one that would fit universally
I've already run a couple prints. Extruder and hotend are greate I'm using a bmg-m and mosquito magnum hotend .. the ones i see are to close to the hotend "in my opinion" and most wont fit my layout
Im hopping not to have to design one i like the fang style or the larger ring type
Sorry should proof read
-
there is no universal one
what hotend do you have?
what mount do yo have? -
Mosquito magnum and bmg-m exteuder.
-
-
I printed the slice engineering one but the cartrage and sensor wires are an issue i do see a workaround though ,,,
so this will work. Thanks agan veti
