First real print - love this board
-
I've printed some minor parts to finish my machine but this is the first real non-printer related print I've done after doing some calibration. Bed leveling is spot on with the BLTouch even though my bed was 1mm out of level for the first test.
I'm not sure if its the motors or the board but my machine is silent when printing. I'm not talking quiet, I'm talking silent. The only thing you hear is the mainboard fan and the cold side fan on the extruder. You can hear the bearings move.
I have to say it was interesting learning how to set up this board but well worth it in the end and besides, learning is half the fun.
I'll post the pic when I figure out how to attach it.
Edit: OK, so how do I attach a pic?
-
Congrats, what speed are you printing at?
-
80mm/s
-
Any tips on how to upload pics?
-
Currently you need to upload them to a public file sharing site such as Dropbox or imgur and then link to them.
-
Ah. Thanks
-
Lets see if this works
