Can not homey but homeall or other is OK
-
I use duet WIFI with rrf3.1，my printer iscorexyU，when i homeall or homex homeu homez is OK，but homey when endtop trigger the B MOTO is not stop！
I think that maybe a bug cause when I homeall it isall right，that only for homey。
homeY.G
G91
G1 H2 Z2 F380
G1 H1 Y-350 F2000
G1 H2 Y55 F1280
G1 H2 Z-2 F300 ; lower Z again
G90 ; absolute positioning
homeall.G
G1 H1 U-365 F3000
G1 H1 X365 F2000
G1 H1 Y-320 F2000
G1 H1 U-365 F3000
G1 X350 Y5 F3000
G1 U5 F3000
G1 H1 X10 Y-10 F1200
G1 H1 U-10 F1200
G90 ; absolute positioning
G1 X260.5 Y30 F6000
G30 -
@crazy-pig said in Can not homey but homeall or other is OK:
G1 H2 Z2 F380
G1 H1 Y-350 F2000
G1 H2 Y55 F1280
G1 H2 Z-2 F300 ; lower Z againChange all H2 parameter to H1
(UTC+1)
-
@DIY-O-Sphere thankyou，I try it now。
-
@DIY-O-Sphere It’s work！thanks！
