Dull 1st and top layer

[ziggymanpopo]

Can someone tell me why this happens. I frequently get dull finish. On top and first layer. Any idea why??

[ziggymanpopo]

[ziggymanpopo]

Ran temp beteen 220 and 230

Print temp from manufacturer is 220 tp 250

[Stephen6309]

@ziggymanpopo With PLA, I've found the hotter you print it at, the shinier it gets.

[Phil Maddox]

You never really know if your thermistor is accurate or not so treat manufacturer recommended temperature data carefully.
When ever i get new filament i always print a temp tower ( https://www.thingiverse.com/thing:2493504) at 30mm/s to get a reasonable starting point.

Experimenting with the part cooling fan is worthwhile too.
Good luck

[ziggymanpopo]

Thanks for the input

[Veti]

also what thermistor are you using and whats your thermistor config?