• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Firmware wishlist and priorities for Duet WiFi and Duet Ethernet

Scheduled Pinned Locked Moved
Firmware wishlist
113
236
50.4k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    gavatron3000 @gavatron3000
    last edited by 13 Dec 2018, 23:18

    @gavatron3000 said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:

    My wishlist:
    Move axis till endstop or input reached. If not made by "X"mm then pause
    Also be able to invert the endstop or input depending on desired condition

    Forgot to add this request is to help with making the MMU2 work as intended with respect to detecting loading and unloading issues. This way I run it with the duet electronics and not use the prusa Arduino.
    Cheers
    Gav

    1 Reply Last reply Reply Quote 0
    • undefined
      dc42 administrators @3DOeste
      last edited by 22 Dec 2018, 16:41

      @3doeste said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:

      @dc42 I think the major difference is how G0 and G1 commands are used, since on industrial controllers you only used G0 and G1 once, and all the following blocks asume the last parameter until a G0 or G1 command is issue again.

      That is now supported in firmware 2.02RC7.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      1 Reply Last reply Reply Quote 0
      • undefined
        daveidmx
        last edited by 23 Dec 2018, 01:26

        With the RTOS port I assume it's now easier to add additional background tasks to the firmware. When a print starts, could the firmware also start running a simulation in the background, and when complete that simulation time could be fed back to DWC/PanelDue for an additional (and presumably more accurate) print time estimate?

        undefined 1 Reply Last reply 23 Dec 2018, 06:58 Reply Quote 1
        • undefined
          patakopecek @daveidmx
          last edited by 23 Dec 2018, 06:58

          @daveidmx good idea, but the duet could run out of resources

          undefined 1 Reply Last reply 23 Dec 2018, 09:49 Reply Quote 0
          • undefined
            dc42 administrators @patakopecek
            last edited by dc42 23 Dec 2018, 09:49

            @patakopecek said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:

            @daveidmx good idea, but the duet could run out of resources

            That's the likely problem. The Duet 2 doesn't have enough RAM to run two instances of the Move subsystem. So we'd have to run the simulation while the Duet is sitting idle. Then we would have to either abandon the simulation if you send any commands to the Duet, or save enough state to be able to resume it later.

            When a simulation completes, the simulated time is stored at the end of the file. PanelDue displays that time when you select the file.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            • ?
              A Former User
              last edited by 22 May 2019, 19:14

              @dc42

              late to the party:

              6-10

              1 Reply Last reply Reply Quote 0
              • undefined
                snufkin
                last edited by 26 May 2019, 23:34

                My vote is:

                1. True bed levelling using 2, 3 or possibly 4 independently-driven Z motors and a Z probe.
                2. Automatic advance of changes in the colour mix when using a mixing hot end. See deckingman's blog.
                3. Support for PanelOne 20x4 text displays, or possibly 12864 mono graphics displays.
                4. Ability to update PanelDue firmware via the web interface.
                5. Ability to control an electronics cooling fan thermostatically based on CPU temperature and driver overheat warning.

                Thanks for all you do for the community!

                undefined 1 Reply Last reply 27 May 2019, 01:59 Reply Quote 0
                • undefined
                  Phaedrux Moderator @snufkin
                  last edited by 27 May 2019, 01:59

                  @snufkin said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:

                  My vote is:

                  1. True bed levelling using 2, 3 or possibly 4 independently-driven Z motors and a Z probe.

                  This one exists now. https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors

                  1. Automatic advance of changes in the colour mix when using a mixing hot end. See deckingman's blog.
                  2. Support for PanelOne 20x4 text displays, or possibly 12864 mono graphics displays.

                  The Duet Maestro supports 12864 displays. The other Duets lack the hardware needed. But there are other alternatives to the PanelDue now as well. Cheap tablets as a web interface or even a customized simplified interface. https://forum.duet3d.com/topic/9257/dueui-1-1-0-is-released

                  1. Ability to update PanelDue firmware via the web interface.

                  Still on the wishlist.

                  1. Ability to control an electronics cooling fan thermostatically based on CPU temperature and driver overheat warning.

                  This is now possible as well. https://duet3d.dozuki.com/Wiki/Mounting_and_cooling_the_board#Section_Cooling

                  Thanks for all you do for the community!

                  Z-Bot CoreXY Build | Thingiverse Profile

                  ? 1 Reply Last reply 8 Jan 2021, 13:25 Reply Quote 0
                  • undefined
                    littlehobbyshop
                    last edited by 11 Apr 2020, 19:50

                    @dc42 I think this post needs deleting and updating

                    BLV MGN Cube w/Hemera, K8200, Sunlu S8

                    1 Reply Last reply Reply Quote 4
                    • ?
                      A Former User @Phaedrux
                      last edited by 8 Jan 2021, 13:25

                      @Phaedrux said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:

                      @snufkin said in Firmware wishlist and priorities for Duet WiFi and Duet Ethernet:

                      My vote is:

                      1. True bed levelling using 2, 3 or possibly 4 independently-driven Z motors and a Z probe.

                      This one exists now. https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors

                      1. Automatic advance of changes in the colour mix when using a mixing hot end. See deckingman's blog.
                      2. Support for PanelOne 20x4 text displays, or possibly 12864 mono graphics displays.

                      The Duet Maestro supports 12864 displays. The other Duets lack the hardware needed. But there are other alternatives to the PanelDue now as well. Cheap tablets as a web interface or even a customized simplified interface. https://forum.duet3d.com/topic/9257/dueui-1-1-0-is-released

                      1. Ability to update PanelDue firmware via the web interface.

                      Working since RRF3.2 😂

                      1. Ability to control an electronics cooling fan thermostatically based on CPU temperature and driver overheat warning.

                      This is now possible as well. https://duet3d.dozuki.com/Wiki/Mounting_and_cooling_the_board#Section_Cooling

                      Thanks for all you do for the community!

                      1 Reply Last reply Reply Quote 0
                      • First post
                        Last post
                      Unless otherwise noted, all forum content is licensed under CC-BY-SA