Invalid max. MCU Temperature in DWC

[TopperHarley]

Just a small issue i have notivced:

Looks like the maximum value is not updated properly.

(Duet Web Control 3.2.0)

Best regards
Topper Harley

[chrishamm]

If you are on DWC 3.2, please send this from the G-code console and post the output:

echo boards[0].mcuTemp.current
echo boards[0].mcuTemp.min
echo boards[0].mcuTemp.max

AFAICS the correct fields are used DWC.

[achrn]

@chrishamm said in Invalid max. MCU Temperature in DWC:

echo boards[0].mcuTemp.max

If I hover the mouse over the MCU temperature in the status box the reported maximum is less than the current temperature, but boards[0].mcuTemp.max reports a different temperature that is higher than the current temperature (i.e. that could be teh maximum temperature).

[chrishamm]

What board do you have? If it is a Duet 3, do you have a Pi connected?

[TopperHarley]

@chrishamm

Im running a Duet2 Ethernet (standalone) with RRF3.2 + DWC 3.2.

I have tried to reproduce the issue, but this time everything looks just fine...

[achrn]

@chrishamm
Yes, it has a Pi 4, 4GB

Board: Duet 3 MB6HC (MB6HC)
DSF Version: 3.2.0
Firmware: RepRapFirmware for Duet 3 MB6HC 3.2 (2021-01-05)

Duet Web Control 3.2.0

Firefox 84.0.2 (64-bit) on a win 10 machine

The box that displays when I hover mouse over the MCU temperature displays the wrong maximum value - one that is lower than the current value, and lower than the boards[0].mcuTemp.max value:

[TopperHarley]

@chrishamm

I was able to reproduce the issue: