Hallo zusammen!

Ich habe vor einigen Tagen 5 Platinen folgende Platine von @deadwood83 bei JLBPCB bestellt (vollständig bestückt):

https://easyeda.com/p.cartwrig/duetdaughterboard_sbc
https://forum.duet3d.com/topic/17203/duet-2-ethernet-and-sbc/164?_=1617469843240

Nun habe ich 3 übrig und würde sie gern an die deutsche Community weitergeben. Wer also Interesse hat, bitte einfach melden.
(Ich dachte so an 5-10€ inc. Versand pro Platine. Für alle 5 habe ich ~30€ gezahlt)

Liebe Grüße
Topper Harley

@CaLviNx
I think your steps/mm (X and Y) are not defined correctly in your RRF3 config. (because of wrong dimensions of your print)

@Danal

In a perfect world, the measured Z offset will be saved for the selected tool. So there is no need to edit the config.g by hand. This would allow to change the nozzle of a tool followed by an automated measuring of the Z offset.

Your scripts are a big step forward and im allready really happy with this solution. But a new GCODE to fully automate this process would be perfect.

@Phaedrux

Thanks for your help!

It is not a big deal for me. The Menu entry "Display" (under file section) is a little bit confusing i think. First i thought i can display all file from SD card here.

Maybe it is an option to rename "Display" to "External Display" or something like this.

@o_lampe
Danke! Ich habe ihn gerade mal angeschrieben.

I think he wants to move the printer to the initial/zero/home postition without homing it first. Maybe a global variable could be a way to to something like this?

Hello guys!

I have installed the SBC daughterboard from @deadwood83, because i want to switch to SBC mode later with the next release of RRF. It seem like my printer can't access to my network anymore with the installed daughter board (running standard image Duet2CombinedFirmware.bin 3.2.2).

I was expecting there should be no issues running the standard image with installed SBC daughterboard.

@resam
I think you talk about the Wifi-Version. This one is for the Duet 2 Ethernet.

@o_lampe
Danke! Ich habe ihn gerade mal angeschrieben.

I have ordered some boards from @deadwood83 at JLCPCB.

If you are from Germany and need one, feel free to contact me: https://forum.duet3d.com/topic/22545/3x-duet-2-ethernet-sbc-adapter-to-sell-germany-only

PUSH!!!!

2 sind noch da!

Hallo zusammen!

Ich habe vor einigen Tagen 5 Platinen folgende Platine von @deadwood83 bei JLBPCB bestellt (vollständig bestückt):

https://easyeda.com/p.cartwrig/duetdaughterboard_sbc
https://forum.duet3d.com/topic/17203/duet-2-ethernet-and-sbc/164?_=1617469843240

Nun habe ich 3 übrig und würde sie gern an die deutsche Community weitergeben. Wer also Interesse hat, bitte einfach melden.
(Ich dachte so an 5-10€ inc. Versand pro Platine. Für alle 5 habe ich ~30€ gezahlt)

Liebe Grüße
Topper Harley

I have ordered some of these nice PCBs by @deadwood83 for Duet2-Ethernet at JLCPCB: (PCBs are full by JLCPCB)
https://easyeda.com/p.cartwrig/duetdaughterboard_sbc
(Big thanks for the great work!)

Because i only need one of these, i have to share 4 to the community. So if you live in germany, fell free to contact me.

@chrishamm

I was able to reproduce the issue: