BIQU H2, E3D Hemera, Trianglelabs Matrix or BMG + Mosquito

myhrmans

Hi there.
I have a Sidewinder X1 that the hotend recently failed on and would like to change everything while I'm at it.

Been looking at the H2, Hemera, Matrix and a combination of A BMG + Mosquito.

Hemera is almost twice as much for mer compared to the the H2 and Matrix so even tho it's probably one of the better I don't really fancy paying so much for the Hemera + import taxed etc.

Has anyone tried the H2?
Seems like it's kinda new and wondering if anyone have any pros and cons with it compared to the Hemera, matrix and BMG+M?

Veti

see

https://3dprintbeginner.com/biqu-h2-extruder-review/

https://3dprintbeginner.com/trianglelab-matrix-extruder-review-hemera-alternative/

also one thing to consider

https://3dprintbeginner.com/bmg-wind-review-sidewinder-x1-upgrade-guide/

jmjcoke

I have the Hemera and the bmg mosquito magnum.

The BMG mosquito is as near flawless as it gets.
The Hemera is good also, and compact.
I am going to upgrade an IDEX machine I have with 2 Hemeras because it is so much cheaper.

The only failure I have had with the Hemera is printing tpu.
I have had no failures with the mosquito magnum after 100kg of pla/petg filament.

Veti

on that site there is actually a summary of all

https://3dprintbeginner.com/direct-drive-extruder-buyers-guide/