RepRapFirmware 3.2.2 update question

Ralms

Hi there,

I've saw the 3.2.2 update on RepRapFirmware and I've noticed it fixed an issued I've suffered from:
"[Duet 3 MB6HC] (regression in 3.2) The minimum step pulse width time of the TMC5160 was not always met. This could lead to missed steps when high step rates were used."

I'm just have a simple question so I understand it better the best way to update on Standalone mode.

I've noticed that there is no "Duet3and3Firmware-3.2.2.zip" combined file.

Is the combined zip, just the DuetWebControl-SD.zip with the .bin and .uf2 added to it?
Additionally, since I only have a "Duet 3 MB6HC", can I just create a zip file of DuetWebControl-SD contents with the Duet3Firmware .bin files for the board and modules I have?
For example a collection of these files:
- DWC files
- Duet3_SDiap32_MB6HC.bin
- Duet3Firmware_MB6HC.bin
- Duet3Firmware_TOOL1LC.bin

Thank you for the clarification in advance.

chrishamm

Upload these two files on the System Files page and confirm potential update prompts:

https://github.com/Duet3D/RepRapFirmware/releases/download/3.2.2/Duet3Firmware_MB6HC.bin
https://github.com/Duet3D/DuetWebControl/releases/download/v3.2.2/DuetWebControl-SD.zip

We're going to add the missing update ZIP file shortly, sorry for the inconvenience.

Ralms

@chrishamm said in RepRapFirmware 3.2.2 update question:

Upload these two files on the System Files page and confirm potential update prompts:

https://github.com/Duet3D/RepRapFirmware/releases/download/3.2.2/Duet3Firmware_MB6HC.bin
https://github.com/Duet3D/DuetWebControl/releases/download/v3.2.2/DuetWebControl-SD.zip

We're going to add the missing update ZIP file shortly, sorry for the inconvenience.

It's fine, I was using the opportunity to also understand better each component.
So I could even update them separately right?

Uploading the DuetWebControl-SD will update DWC, the Firmware .bins update the boards firmware and I just need to upload the ones I have, while having the SDiap32 ones since I'm doing InApp upgrade in Standalone mode.

Is this correct?

jay_s_uk

@Ralms yes, thats correct

dc42

@Ralms said in RepRapFirmware 3.2.2 update question:

've noticed that there is no "Duet3and3Firmware-3.2.2.zip" combined file.

I have now added that file and announced the 3.2.2 release. The IAP file is unchanged from firmware 3.2.