Zprobe scraping along the last layer
-
Hiya,
My homing is now nailed to a T, and my probe is above my nozzle by 2mm i.e. nozzle hits the bed first like this(_-), how ever the probe eventually starts hitting against the layer, is this a case of a slower z axis.Please Help as so far print adhesion is good, i wouldn't the prints to be knocked of the bed
-
looked at the calibration and there is nothing wrong…
-
solved the issue by manually lifting, may look into a servo
-
manually lifting the probe works great, since then i have managed to print all bowden parts required, looking into bed lev eling
