7" Paneldue :(
-
I read some posts a while back talking about the 7" panel issues. Does this look like one of them? I cycled the power on the printer and it came back on for a short time before returning to this.
-
I have not seen that particular failure mode before but it does not look good! The issues we had were on initial test (we test all Paneldues +screens we sell directly), that said that certainly looks like an LCD failure, please contact your supplier.
-
You could try gently waggling the thing that's a cross between a cable and a PCB that connects the TFT panel to the PCB it is attached to. I've heard of users getting displays to work again by doing that.
-
This cable?
-
I am sure you are talking about the larger one on the right.
-
I wiggled, disconnected and reconnected and nothing helped. In fact it went from a few lines to completely white with tons of colorful lines. Bummer.
-
The one you've indicated with the arrow is for the touch interface. The larger one on the right is for the LCD.
