Bug: RRF 3.3beta2 - G92 B0 changes E axis position

dc42

@DocTrucker, when this code executed from the trigger, was anything else happening? I am wondering whether the change in E value may have been caused by a command executed on another channel.

DocTrucker

@dc42 in this example I was running through the code line by line in the command terminal on DWC while the machine was idle.

dc42

@DocTrucker, thanks. Please can you try the firmware build at https://www.dropbox.com/sh/6203euyyobllic5/AABTHIbn7F_maK9p-oy7vq3Ea?dl=0, which includes a fix for the other G92 issue.

DocTrucker

@dc42 Thanks, I will try to have a go on it over the weekend, Monday at latest.

DocTrucker

@dc42

Error: M997: In-application programming binary "0:/firmware/Duet2_SDiap32_WiFiEth.bin" not found

I don't normally have a firmware folder?

I re-ran the tests today and this is the shortest way of replicating the issue:

29/03/2021, 19:30:32 	Emergency stop, attemping to reconnect...

29/03/2021, 19:30:39 	M114
X:0.000 Y:0.000 Z:0.000 B:0.000 E:0.000 E0:0.0 Count 0 0 0 0 Machine 0.000 0.000 0.000 0.000 Bed comp 0.000

29/03/2021, 19:30:47 	G1 E1 F500
29/03/2021, 19:30:47 	G1 E1 F500
29/03/2021, 19:30:48 	G1 E1 F500

29/03/2021, 19:30:53 	M114
X:0.000 Y:0.000 Z:0.000 B:0.000 E:0.000 E0:3.0 Count 0 0 0 0 Machine 0.000 0.000 0.000 0.000 Bed comp 0.000

29/03/2021, 19:31:00 	G92 B0

29/03/2021, 19:31:04 	M114
X:0.000 Y:0.000 Z:0.000 B:0.000 E:0.000 E0:1.0 Count 0 0 0 0 Machine 0.000 0.000 0.000 0.000 Bed comp 0.000

Can we have another 't' in attempting please?

Phaedrux

3.3 adds the use of a /firmware folder to help clean up the sys folder.

Are you also using DWC 3.3 beta2?

You may need to create the folder manually and move your firmware files over.

dc42

@phaedrux said in Bug: RRF 3.3beta2 - G92 B0 changes E axis position:

You may need to create the folder manually and move your firmware files over.

It's sufficient just to upload the IAP file through DWC again.

DocTrucker

I'll have a go first thing tomorrow. Things overran today.

DocTrucker

This post is deleted!

DocTrucker

@dc42 Problem remains...

30/03/2021, 08:28:39 	M114
X:0.000 Y:0.000 Z:0.000 B:0.000 E:0.000 E0:0.0 Count 0 0 0 0 Machine 0.000 0.000 0.000 0.000 Bed comp 0.000

30/03/2021, 08:28:52 	G1 E1 F500
30/03/2021, 08:28:53 	G1 E1 F500
30/03/2021, 08:28:53 	G1 E1 F500

30/03/2021, 08:28:58 	M114
X:0.000 Y:0.000 Z:0.000 B:0.000 E:0.000 E0:3.0 Count 0 0 0 0 Machine 0.000 0.000 0.000 0.000 Bed comp 0.000

30/03/2021, 08:29:06 	G92 B0

30/03/2021, 08:29:09 	M114
X:0.000 Y:0.000 Z:0.000 B:0.000 E:0.000 E0:1.0 Count 0 0 0 0 Machine 0.000 0.000 0.000 0.000 Bed comp 0.000

Contents of system folder: https://www.dropbox.com/s/7c18bi3c23hz3bc/210330_download.zip?dl=0

Board: Duet 2 Ethernet (2Ethernet)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3beta2+1 (2021-03-26)
Duet Web Control 3.3.0-b2

dc42

@doctrucker, thanks, I've reproduced that. Looking into it now.

dc42

Fixed in next 3.3beta.

DocTrucker

@dc42 great!