Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Problem after Update

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    stepper motor noise don’t move update firmware 3 update
    2
    3
    237
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • MauriceMundefined
      MauriceM
      last edited by

      Hey,
      Im jsut building another Voron V2 and i wanted to use the same Firmware Setup as in my other Printers.
      But i use RRF3.2.2 on my new Build and it seems that something changed because my steppers wont work.

      I connectes them the same way as on my old printer.
      All it does is making some noise.

      To check the cables i connected one Stepper to my other printer and there it works.....

      Can it be that something changed from RRF3 to 3.2.2.

      And if so am i able to change the firmware to 3.0?

      If it try this, i get an error message that some folders are missing...
      What weard, because i updated 3.2.2 on this board via de Web Interface

      Thanks alot.

      MauriceMundefined 1 Reply Last reply Reply Quote 0
      • MauriceMundefined
        MauriceM @MauriceM
        last edited by

        This post is deleted!
        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          Please post the results of sending M122 and M98 P"config.g".

          You're sure the motor phases are paired correctly?

          https://duet3d.dozuki.com/Wiki/Choosing_and_connecting_stepper_motors#Section_Identifying_the_stepper_motor_phases

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA