Thanks Guys, now it works , i bought cables with different colour matching. Was a stupid mistake but i damaged nothing and now i can enjoy my silent printer.
Best posts made by MauriceM
RE: Problem with Duex Endstop Pins (external Gcode)
I solved the Problem
You have to PullUp the Pin than it will work.
Latest posts made by MauriceM
RE: Printing Problems
@cosmowave ok that could be.
First i will try an other slicer, than i will test it with my other printers.
But they all build exactly the same, and the power off the bed should be the same. no matter how many parts i have on the bed.
Thats why im so confused.
Hello, I have a problem with my printer which I can not classify, so I thought I just ask here if anyone has seen the problem by chance before.
I have a Voron V2 with eig well-built mechanics.
The problem is this, when I want to print a lot of parts at once, the printer spins a little.
It extrudes way too much material on the 20-30 layer causing a line in the print parts.
But it only does this when I print more than 5 parts, before that everything is great.
I wonder if it is the software of the printer or if it is a different problem.
Unfortunately I am not sure.
Problem after Update
Im jsut building another Voron V2 and i wanted to use the same Firmware Setup as in my other Printers.
But i use RRF3.2.2 on my new Build and it seems that something changed because my steppers wont work.
I connectes them the same way as on my old printer.
All it does is making some noise.
To check the cables i connected one Stepper to my other printer and there it works.....
Can it be that something changed from RRF3 to 3.2.2.
And if so am i able to change the firmware to 3.0?
If it try this, i get an error message that some folders are missing...
What weard, because i updated 3.2.2 on this board via de Web Interface