Odd Issue

R3play

Hi,

So yesterday I was printing just fine.
Today I modelled something with Fusion360, exported it to a STL and uploaded it to my printer.
Started the print and noticed that my extruder wasn't extruding during the print, so I canceled it, re-sliced, uploaded and tried again.
Again same issue.

Turned off the printer, then back on and re-connected via my browser.
Now when I want to open the Jobs list I get the following error:

I then removed the SD card and plugged it in the PC to check if it was corrupted or so. But nothing. Just worked fine.
Re-installed it in the Duet board and still the same issue.

Odd thing is, when I had the SD card in my PC I manually uploaded the gcode to it.
Paneldue display is seeing all my files and can start the print (prints normally)
However in web control I can't acces the file list.

What's going on here?

R3play

Edit: I can upload a file via web control, however it doesn't show up in there. Get the same error then.
However, when I browse through my files on the paneldue, it is listed on there

Phaedrux

Can you copy and paste the full text from M122 and get the DWC version as well?

After uploading via web control can you refresh the file list page?

R3play

@phaedrux said in Odd Issue:

Can you copy and paste the full text from M122 and get the DWC version as well?

After uploading via web control can you refresh the file list page?

M122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 3.2.2 running on Duet WiFi 1.02 or later
Board ID: 08DGM-9T6BU-FG3SN-6JKDD-3SN6S-TVWHH
Used output buffers: 3 of 24 (24 max)
=== RTOS ===
Static ram: 23460
Dynamic ram: 73344 of which 40 recycled
Never used RAM 15236, free system stack 189 words
Tasks: NETWORK(ready,188) HEAT(blocked,308) MAIN(running,449) IDLE(ready,20)
Owned mutexes: WiFi(NETWORK) HTTP(MAIN)
=== Platform ===
Last reset 00:00:40 ago, cause: power up
Last software reset at 2021-04-14 18:47, reason: User, GCodes spinning, available RAM 15200, slot 1
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a
Error status: 0x04
Aux0 errors 0,0,0
MCU temperature: min 19.5, current 23.8, max 24.0
Supply voltage: min 24.0, current 24.1, max 24.2, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: position 0, standstill, SG min/max not available
Driver 1: position 0, standstill, SG min/max not available
Driver 2: position 0, standstill, SG min/max not available
Driver 3: position 0, standstill, SG min/max not available
Driver 4: position 0, standstill, SG min/max not available
Driver 5: position 0
Driver 6: position 0
Driver 7: position 0
Driver 8: position 0
Driver 9: position 0
Driver 10: position 0
Driver 11: position 0
Date/time: 2021-04-15 17:03:37
Cache data hit count 48010034
Slowest loop: 115.29ms; fastest: 0.21ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Storage ===
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest read time 1.2ms, write time 0.0ms, max retries 0
=== Move ===
DMs created 83, maxWait 0ms, bed compensation in use: none, comp offset 0.000
=== MainDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== AuxDDARing ===
Scheduled moves 0, completed moves 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
=== GCodes ===
Segments left: 0
Movement lock held by null
HTTP is ready with "M122 " in state(s) 0
Telnet is idle in state(s) 0
File is idle in state(s) 0
USB is idle in state(s) 0
Aux is idle in state(s) 0
Trigger is idle in state(s) 0
Queue is idle in state(s) 0
LCD is idle in state(s) 0
Daemon is idle in state(s) 0
Autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 150.09ms; fastest: 0.00ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
HTTP sessions: 1 of 8
- WiFi -
Network state is active
WiFi module is connected to access point 
Failed messages: pending 0, notready 0, noresp 0
WiFi firmware version 1.25
WiFi MAC address 84:f3:eb:42:b5:1a
WiFi Vcc 3.42, reset reason Power up
WiFi flash size 4194304, free heap 25760
WiFi IP address 192.168.1.2
WiFi signal strength -36dBm, mode 802.11n, reconnections 0, sleep mode modem
Clock register 00002002
Socket states: 0 0 0 0 0 0 0 0

Duet Web Control 3.2.2

When I refresh after uploading via web control I get the same error.
It says that the upload is succesfull, but I see no files in the 'Jobs' menu.

Phaedrux

Do you have a new SD card to test with? Copy over your files from the existing card and see if it works better.

If that doesn't help, try replacing your current /www folder with the contents of the DWC zip file.

https://github.com/Duet3D/RepRapFirmware/releases/download/3.2.2/DuetWebControl-SD.zip

R3play

Used a Sandisk 16GB card and that seems to have solved the issue.
I guess the unnamed/unbranded 4GB card went bad