reduce printarea while printing ?

[joeko]

hallo,
i use repetier server and with this it is possible reduceing or removeing parts from printarea. if i notice that a part of the printarea is bad than i can stop printing this but the other area will print. is this also possible with reprap ?

[jay_s_uk]

@joeko Yes, use M486 https://duet3d.dozuki.com/Wiki/Gcode#Section_M486_Object_cancellation

[joeko]

@jay_s_uk said in reduce printarea while printing ?:

@joeko Yes, use M486 https://duet3d.dozuki.com/Wiki/Gcode#Section_M486_Object_cancellation

thx for the answer.
it can be showed on an lcd ? how ?

[Phaedrux]

There is a DWC plugin that displays the currently loaded gcode file as a 3D object. You can choose can cancel from there.

Check your DWC plugins (3.2.2 and beyond)

[joeko]

@phaedrux said in reduce printarea while printing ?:

There is a DWC plugin that displays the currently loaded gcode file as a 3D object. You can choose can cancel from there.

Check your DWC plugins (3.2.2 and beyond)

the 3d viewer ?
hmm, after every start of the board i have to start this plugin manually, with my other duet3 it start from it self.