Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Your Duet rejected the HTTP request

    Scheduled Pinned Locked Moved Solved
    Firmware installation
    4
    12
    884
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dc42undefined
      dc42 administrators @Pyper
      last edited by

      @pyper said in Your Duet rejected the HTTP request:

      But when I go to the address it says "Your Duet rejected the HTTP request"

      What's the rest of the text on that page? RRF doesn't return that text by itself.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      Pyperundefined 1 Reply Last reply Reply Quote 0
      • Pyperundefined
        Pyper @dc42
        last edited by

        @dc42
        The complete message is "Your Duet rejected the HTTP request: page not found"

        1 Reply Last reply Reply Quote 1
        • Pyperundefined
          Pyper @droftarts
          last edited by

          @droftarts
          Thank you for helping.

          M115 returns "FIRMWARE_NAME: RepRapFirmware for Duet 2 WiFi/Ethernet FIRMWARE_VERSION: 2.0(RTOS) ELECTRONICS: Duet WiFi 1.02 or later FIRMWARE_DATE: 2018-06-05b3<LF>ok<LF>"

          I downloaded the RRF2.0 link you posted, deleted the existing www folder, and created a new one with the DuetWebControl-SD-2.07.zip files.

          I still get the same error. Not sure what is going on.

          I formatted the SD card with the suggested utility to FAT32.

          Arg!

          droftartsundefined 1 Reply Last reply Reply Quote 1
          • droftartsundefined
            droftarts administrators @Pyper
            last edited by droftarts

            @pyper that’s very old firmware on a Duet. Did you buy it recently? Where from?

            What specification is the SD card you’re using? Please send M122 with the card in the Duet, and post the full response. Before you do that, remember to set the line ending to LF in YAT, or the response will be truncated and barely readable; see https://duet3d.dozuki.com/Guide/1.)+Getting+Connected+to+your+Duet/7#s7

            Edit: also send

            M20 P"/www"
            

            to list the contents of the www folder.

            Ian

            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

            Pyperundefined 1 Reply Last reply Reply Quote 0
            • Pyperundefined
              Pyper @droftarts
              last edited by

              @droftarts
              I think they bought this awhile back but are only just now getting around to installing it.

              Well, I keep trying to post the contents from those commands but it gets flagged as spam or something..

              droftartsundefined 1 Reply Last reply Reply Quote 1
              • droftartsundefined
                droftarts administrators @Pyper
                last edited by

                @pyper I’ve upvoted some of your posts which should give you enough reputation to post the long responses.

                Ian

                Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                Pyperundefined 1 Reply Last reply Reply Quote 0
                • Pyperundefined
                  Pyper @droftarts
                  last edited by Pyper

                  @droftarts
                  Thank you
                  M122:

                  === Diagnostics ===
                  RepRapFirmware for Duet 2 WiFi/Ethernet version 2.0(RTOS) running on Duet WiFi 1.02 or later
                  Board ID: 08DJM-9178L-L2MS8-6JKF0-3SN6Q-TTFYR
                  Used output buffers: 2 of 20 (2 max)
                  === RTOS ===
                  Static ram: 28380
                  Dynamic ram: 95820 of which 16 recycled
                  Exception stack ram used: 236
                  Never used ram: 6620
                  Task NETWORK ready, free stack 1440
                  Task HEAT blocked, free stack 1264
                  Task MAIN running, free stack 3656
                  === Platform ===
                  Last reset 00:00:28 ago, cause: reset button or watchdog
                  Last software reset details not available
                  Error status: 0
                  Free file entries: 10
                  SD card 0 detected, interface speed: 20.0MBytes/sec
                  SD card longest block write time: 0.0ms
                  MCU temperature: min 31.0, current 31.6, max 31.7
                  Supply voltage: min 1.6, current 1.7, max 1.7, under voltage events: 0, over voltage events: 0
                  Driver 0: ok, SG min/max not available
                  Driver 1: ok, SG min/max not available
                  Driver 2: ok, SG min/max not available
                  Driver 3: ok, SG min/max not available
                  Driver 4: ok, SG min/max not available
                  Date/time: 1970-01-01 00:00:00
                  Slowest loop: 1.08ms; fastest: 0.06ms
                  === Move ===
                  Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm 240, MaxWait: 0ms, Underruns: 0, 0
                  Scheduled moves: 0, completed moves: 0
                  Bed compensation in use: none
                  Bed probe heights: 0.000 0.000 0.000 0.000 0.000
                  === Heat ===
                  Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
                  === GCodes ===
                  Segments left: 0
                  Stack records: 1 allocated, 0 in use
                  Movement lock held by null
                  http is idle in state(s) 0
                  telnet is idle in state(s) 0
                  file is idle in state(s) 0
                  serial is ready with "M122" in state(s) 0
                  aux is idle in state(s) 0
                  daemon is idle in state(s) 0
                  queue is idle in state(s) 0
                  autopause is idle in state(s) 0
                  Code queue is empty.
                  === Network ===
                  Slowest loop: 14.31ms; fastest: 0.01ms
                  Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
                  HTTP sessions: 0 of 8
                  - WiFi -
                  Network state is running
                  WiFi module is connected to access point 
                  Failed messages: pending 0, notready 0, noresp 0
                  WiFi firmware version 1.21
                  WiFi MAC address bc:dd:c2:57:ae:e6
                  WiFi Vcc 3.32, reset reason Turned on by main processor
                  WiFi flash size 4194304, free heap 16704
                  WiFi IP address 10.1.10.172
                  WiFi signal strength -48dBm, reconnections 0, sleep mode modem
                  Socket states: 0 0 0 0 0 0 0 0
                  === Expansion ===
                  ok
                  
                  

                  M20 P"/www":

                  Begin file list
                  css
                  favicon.ico.gz
                  fonts
                  index.html.gz
                  js
                  End file list
                  ok
                  
                  
                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    Try replacing the contents of /www on the SD card with the contents of this zip file: https://github.com/Duet3D/RepRapFirmware/releases/download/2.01/DuetWebControl-1.22.3.zip

                    Then see if you can reach the IP address.

                    If that works, Upload these 3 zip files, one at a time in the system tab in DWC. Don't extract them. Reboot after each. Use M115 to verify the firmware has been applied.
                    https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip
                    https://github.com/Duet3D/RepRapFirmware/releases/download/3.0/Duet2and3Firmware-3.0.zip
                    https://github.com/Duet3D/RepRapFirmware/releases/download/3.2.2/Duet2and3Firmware-3.2.2.zip
                    That will get your firmware and DWC up to date.

                    You can see the change logs here:
                    https://github.com/Duet3D/RepRapFirmware/wiki/Changelog-RRF-3.x

                    For your config, might be a good idea to run through the configurator tool and generate a fresh set for RRF3.
                    https://configtool.reprapfirmware.org/Start

                    Backup your existing config files in the sys folder in case you want to switch back to RRF3. IT’s easy to switch back and forth, just upload the zip file for the version you want and then upload your config files.

                    These documents will come in handy during the conversion.
                    https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview
                    https://duet3d.dozuki.com/Wiki/Gcode

                    Z-Bot CoreXY Build | Thingiverse Profile

                    Pyperundefined 1 Reply Last reply Reply Quote 0
                    • Pyperundefined
                      Pyper @Phaedrux
                      last edited by

                      @phaedrux
                      Success!
                      Thank you so much (all)!
                      I can confirm M115 returns 3.2.2 in YAT
                      Onward!

                      droftartsundefined 1 Reply Last reply Reply Quote 1
                      • droftartsundefined
                        droftarts administrators @Pyper
                        last edited by

                        @pyper That's good to hear. Thinking about it, RRF 2.0 probably doesn't support DWC 2.0.7. My bad!

                        Ian

                        Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA