Live changing Z probe parameters without deleting pin

[KipK]

Hi

I'd like to change my dive height once my 3 point auto bed leveling as been done. By security, I keep the dive height to 15mm in case the bed is tilted before auto level.

Then I'd like after leveling to change the probe dive heightbut I can't call M558 without freeing the zprobe pin first.
Is there an easy way to achieve this ?

[dc42]

@kipk you can use M558 without P or C parameters to change dive height, probing speed, travel speed etc. of the existing configured probe.

[KipK]

@dc42 said in Live changing Z probe parameters without deleting pin:

ut P or C parameters to change dive height, probing speed, travel speed etc. of the existing configured probe.

Thanks. Wondering why I haven't tried that