Duet Meastro input shaping with accel

[Slzer]

Long story short I have some ringing.

I've been reading up on DAA and input shaping here:
https://duet3d.dozuki.com/Wiki/Accelerometers
https://duet3d.dozuki.com/Wiki/Gcode#Section_M593_Configure_Dynamic_Acceleration_Adjustment

Before I order the LIS3DH accel and redesign a bit of my XY carriage to mount it can someone canfirm or deny if I can use it with a Duet Maestro. My firmware version is 3.2.2 do i just need to upgrade to 3.3?

I couldn't see anywhere where it specifically said it was possible?

[Slzer]

Nevermind!

My poor reading skills didn't clock that the Maestro had been grouped with duet 2 wifi + ethernet.