Nevermind!

80ce8bef-1abd-4a55-b140-1b877e3ff300-image.png

My poor reading skills didn't clock that the Maestro had been grouped with duet 2 wifi + ethernet.

@Phaedrux Will Do Thanks.

@bearer said in Duet 2 Maestro and FYSETC Mini12864:

Could you just add which of the two chipsets that display uses? ST7920 or ST7565 iirc.

The Mini12864 uses the ST7565. Displays with the ST7920 such as the reprep discount one are natively supported without the need of a dedicated wiring loom.

Configuration needed:

; Enable LCD M918 P2 E-4

It's working better than ever. Guess it just needed a firmware update.

Thanks a bunch for your fast and professional help. Even though the solution was simple, i likely wouldn't have ever fixed the issue since I was at the end of my rope. So, thanks again.

Can you confirm that you are still running main firmware 2.02, as shown in the M122 listing in your first post?

I can ask chrishamm to look into this message, but he will probably ask you to upgrade to Duet Web Control 2.0.0-RC6, available at https://github.com/chrishamm/DuetWebControl/releases.

That got it working! Thanks for the suggestion.

BTW: flashing the firmware with BOSSA on a Mac worked without a hitch.

You have some other problems. Twice there is the sequence:

es after '''S''', expected 3
Done!
Response while disconnected:

The first line is probably part of an error message from the Duet, but Repetier has chopped off the first part. I've no idea about "Done!" but I think that's from Repetier, not the Duet. After that, Repetier seems to think it shouldn't be connected and is surprised to see a response.

Signal strength of -73dBm is marginal for the WiFi module. Please see https://duet3d.dozuki.com/Wiki/WiFi_disconnections_and_AJAX_timeout_errors.