Minimum toolboard LC-1 v1.1 connections & accelerometer usage
-
This post is deleted! -
@arnold_r_clark you could run some gcode that moves the print head around (i.e. X and Y movements at different speeds)
This would allow you to only connect CAN and power -
@arnold_r_clark said in Minimum toolboard LC-1 v1.1 connections & accelerometer usage:
As the CAN & power connectors carry over from v1.0 to v1.1 is it possible to connect the tool-board up and run a "simulation" g code to obtain accelerometer data with only CAN and power connected up?
Yes.
-
This post is deleted! -
@arnold_r_clark see the Accerometers Wiki page for how to collect and analyse the data. When you have identified the primary ringing frequency, you can set DAA to that frequency.