[RRF 3.3] Parsing Error

[User3D]

Even after upgrading to RRF 3.3 , I get Parsing Error.

Board : Duet 3 MB6HC
RRF : 3.3
Also what does "slowing down poll rate" indicate?

P.S:Monitoring everything on DWC at the same time.

[dc42]

@user3d please run M115 to check that you really are running 3.3 stable.

[User3D]

@dc42 yup

25/06/2021, 10:27:18	M115
FIRMWARE_NAME: RepRapFirmware for Duet 3 MB6HC FIRMWARE_VERSION: 3.3 ELECTRONICS: Duet 3 MB6HC v0.6 or 1.0 FIRMWARE_DATE: 2021-06-22 17:22:04

P.S. : I have my own changes applied on RRF(branch: 3.3-dev) .

[dc42]

@user3d said in [RRF 3.3] Parsing Error:

P.S. : I have my own changes applied on RRF(branch: 3.3-dev) .

I suspect you are not using the 3.3 release CoreN2G files. They were changed shortly before the release to fix this issue.

[User3D]

@dc42 To build RRF ,I confirm that I've used 3.3 release of all the
projects including CoreN2G as instructed in https://github.com/Duet3D/RepRapFirmware/wiki/Building-RepRapFirmware . Downloaded all on the same date i.e. 2021-06-22 .

[dc42]

@user3d in that case I think the PanelDue cable must be picking up interference.

That message has been downgraded to a warning in the latest PanelDue firmware.

[User3D]

@dc42 Thanks for the reply.

@user3d in that case I think the PanelDue cable must be picking up interference.

That message has been downgraded to a warning in the latest PanelDue firmware.

Then What should I do next ?

[KipK]

@user3d try shielded wires?