Webinterface: Upload / Creation DATE column in the Filelist PLEASE…
-
Coming from Octoprint I REALLY miss the Date column in the filelist.
I have many different files in my list and when I uploaded a new file, I always have to search for it, that is annoying.
Instead of the in my eyes pretty much useless "Generated by" column (Who needs this anyway, I presume most of us are not using several slicers and even if) maybe put a Date column please?And another thing: I am using Interface Version 1.19 RC 1 but I liked the old BUTTON for "Print" a lot more than now having to open a context menu and select it from there.
Thanks for listening.
-
And another thing: I am using Interface Version 1.19 RC 1 but I liked the old BUTTON for "Print" a lot more than now having to open a context menu and select it from there.
Just click the filename.
-
-
Web interface requests should be raised in the Duet Web Control Wishlist section.
I agree, a Date column would be useful. There is such a column on the Macros list, but not on the GCode Files list.
-
Does the Duet get the time/date from NTP or ??
I see current time in the webui G Code console messages, but that could have nothing to do with the duet.
The paneldue shows messages as hh:mm since it was generated, kinda neat.I say add NTP to the duet
-
The "generated by" column has a date in it. Clicking that column will give you the files in date order, presuming you used the same slicer for all files.
-
DWC sends the date and time when it connects. When you upload a file, it sends over the last modified time stamp with the file. We've considered using NTP but it hasn't been necessary yet.
-
Personally, I'd like to see the date when the file was saved rather than when it was generated by the slicer. I have a habit of tweaking gcode files using notepad++ or similar then saving it. But I often can't remember if I made the intended changes and uploaded it to the SD card. So I have to look at the date that it was last saved on my PC then upload it again, just to be sure that I have the latest version on the SD card.
-
The "generated by" column has a date in it. Clicking that column will give you the files in date order, presuming you used the same slicer for all files.
Hm I can not confirm this. The order changes if I click on the Column header, but the tooltip says it is not sorted by "Last modification date". And of course I am using the same slicer
-
Only some slicers include the date and time in the "Generated by" comment. I guess your slicer doesn't.
-
Only some slicers include the date and time in the "Generated by" comment. I guess your slicer doesn't.
Well, its Simplify 3D, maybe this one does not, or can I adjust this in the settings of S3D?
-
No date and time for either and I have S3D 4.0.
-
Just upgraded to 1.19 and I can't believe that there still isn't a way of displaying the gcode file dates and listing them in date order.
-
Prusa Slicer 1 - S3D 0
-
why not show the upload date
the time when the file was created on the sd card ? -
Please request this in the Duet Web Control wishlist forum, if it is not already there.
-
Thanks David for moving the thread and sorry for my mistake in the first place…
-
I was missing this feature yesterday. In a project with lots of iterations and low on naming discipline it's very nice to have!