BL touch settings on Reprap configurator.
-
Hello.
Please help.
I am just now trying to change my 3D printer from Duet2wifi to Duet3.
And having a question to set BL touch on the board 121 in Reprap configurator.
Could someone tell me the setting for these three vales?
Thank you.
-
@hiroaki set just the input pin and pwm pin, as you have. Don’t set the modulation pin; not used on BLTouch.
Ian
-
Do i have to add g32 s2 to my gcode start script in slicer?
-
That depends on what you want to do with G32. All G32 does is call the macro bed.g. You can setup whatever you want to happen in bed.g.
https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_G32_Run_bed_g_macro
https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors
