Short-to-ground reported by driver 1 2
-
@gabinnan can you post a photo of the end that goes into the motor?
Looking at the stepperonline page, they should be cables that come directly out of the motor, not with a separate plug. -
-
@gabinnan can you therefore confirm the stepper phases using a multimeter, ignoring the colours of the wires. The link I gave you should guide you in that.
Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
red & blue same phase
black & green same phase -
@jay_s_uk solution?
-
@gabinnan try a different driver and see if the error follows it.
if not, when was your duet purchased? -
@jay_s_uk it is not working. it was purchase on june 14th 2021
-
-
@gabinnan also, where did you purchase it from?
-
@jay_s_uk filafarm in germany
-
@gabinnan said in Short-to-ground reported by driver 1 2:
It says the same error even the is no motor connected
It would seem likely that you have 2 failed drivers.
Please send an email to warranty@duet3d.com and CC your reseller. Include a link to this forum thread and the details of your original purchase. You'll receive a reply with a form to fill out.
Sorry for the inconvenience.
