Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Start-up macro

    Scheduled Pinned Locked Moved
    Firmware wishlist
    4
    5
    291
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • HebigTundefined
      HebigT
      last edited by HebigT

      I've been using Lulzbots recently and they automatically home when you turn on the power.

      I think that's kinda cool. Is there a way to do this in RRF?

      Alex.crundefined fcwiltundefined 2 Replies Last reply Reply Quote 0
      • Alex.crundefined
        Alex.cr @HebigT
        last edited by

        @hebigt
        This is a bad idea.
        Rule of thumb is that machines should not move without you telling it to do so.

        Yes you can call your homeall.g file in your config.g file. This is one way to home the printer automatically on start up. Please do not do this.

        Depending on your printer setup it could cause major failures/crashes. For instance this would cause the machine to home every time the emergency stop is activated.

        Voron2.4/Duet3 SBC+6HC+3HC+1LC+1HCL(x2) - Delta/Duet2 Wifi - CubePro/Duet2 Wifi+Duex5 - Laser/Duet3 Mini5+ - Cel Robox - U̶p̶3̶0̶0̶+/D̶u̶e̶t̶3̶ ̶6̶H̶C̶+̶LC1̶ - F̶T̶-̶5̶/̶D̶u̶e̶t̶2̶ ̶W̶i̶f̶i̶ - S̶o̶l̶i̶d̶o̶o̶d̶l̶e̶

        1 Reply Last reply Reply Quote 2
        • fcwiltundefined
          fcwilt @HebigT
          last edited by

          @hebigt

          Not a good idea.

          In the course of a day's printing the printer will be homed many times.

          There is nothing to be gained by having it home on power up and it's possible that something could go wrong.

          Frederick

          Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

          HebigTundefined 1 Reply Last reply Reply Quote 2
          • HebigTundefined
            HebigT @fcwilt
            last edited by

            @fcwilt @Alex-cr

            Points well taken, thanks.

            1 Reply Last reply Reply Quote 1
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              Just to put the icing on the cake, if you have G28 to home automatically at power up, what happens when you have a power blip mid print? When the power returns and the board starts up, it will home the printer and crash into whatever print is left on the bed.

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 1
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA