DUET3MINI5+

[ansonyang]

Please share a BOOTLOADER of DUET3MINI5+? Thank you

[tecno]

@ansonyang

https://duet3d.dozuki.com/Wiki/Getting_Started_with_Duet_3_Mini_5plus

[ansonyang]

@tecno BOOTLOADER

[tecno]

@ansonyang

https://duet3d.dozuki.com/Wiki/Duet_3_Mini_5plus_Firmware#Section_Programming_the_bootloader

[ansonyang]

@tecno Sorry, maybe I didn’t describe clearly
I want to upload BOOTLOADER to blank ATSAME54

[dc42]

@ansonyang https://github.com/Duet3D/uf2-samdx1/releases

[ansonyang]

@dc42 After the BOOTLOADER is uploaded to the blank ATSAME54, the LED flashes slowly and the DUETBOOT disk is added, but there is no COM display on the motherboard. When the firmware UF2 file is copied to DUETBOOT, the LED flashes quickly, and then the LED turns off, and the motherboard does not respond.
Thank you

[juancar]

@ansonyang hi could you install the bootloader in the duet3 mini 5+? What file did you use it? Thanks

[Phaedrux]

@juancar said in DUET3MINI5+:

@ansonyang hi could you install the bootloader in the duet3 mini 5+? What file did you use it? Thanks

@dc42 said in DUET3MINI5+:

@ansonyang https://github.com/Duet3D/uf2-samdx1/releases