1.19 - PID Tuning with DWC.
-
Commands such as M307 H0 and M303 don't produce any output on the DWC GCODE console, though M303 clearly does it's tuning job. Without being able to see the output however I can't tweak the tuning to my liking; I find that the final 2 degrees on the hotend are approached incredibly slowly.
Am I missing a switch somewhere to enable output?
-
There have been reported issues. DC42 is on it.
-
Maybe already fixed. https://www.duet3d.com/forum/thread.php?id=2377
-
Thanks for confirming it's a known issue. There's nothing in the change notes for 1.19.1 that list this specific issue though.
-
I figured 'what the hell'. It's so easy to upgrade/downgrade the firmware through DWC. Anyway … yes - it seems to be fixed and those commands are now feeding back
