PanelDue Firmware 3.3.0 released

[mfs12]

Hey,

finally we manged to build a new official release.

Big thank you to all who helped testing, reporting bugs and bringing up new ideas!

Release Notes 3.3.0

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

Features:

• added Russian translation
• added support for emerging backlight mp3302 chip
• renamed 'Print' tab into 'Status'
• added slicer time
• added simulated time
• removed layer time
• faster and consistent display of printer status
• display IP address of printer in Setup tab
• adaption to changes of object model
• allow assignment of fans, extruders and heaters to multipls beds, chambers or tools
• added debugging interface to write debugging information as gcode comments to the reprap uart
• increase request timeouts to constant 2s
• added support for new printer state cancelling
• deactivate screensaver when a new M291 message arrives; S0 and S1 leave the screensaver active, S2 and S3 leave screensaver deactivated until user action

Bug fixes:

• gracefully handle parsing errors in M409 K"<key>" requests
• show warning instead of error when JSON parsing errors occur
• fix displaying of percent sign
• fix displaying of M291 dialogs
• fix sending filename in M37
• fix unresponsive screen when showing m291 message while screensaver is active
• fix updating of simulated time left during print
• fix displaying of standby temperature row
• fix state reporting in JSON parser warning
• fix polling interval handling of printer

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.3.0

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

[oozeBot]

Thank you for this release. Overall, everything appears to be working well, but we just noticed an issue. The popup for setting temperatures is not modal - the buttons below it (control, status, console, setup) can still be clicked. I haven't checked if older firmware does this, but we've never experienced it before upgrading to 3.3.

[mfs12]

@oozeBot thanks for reporting.

created an github issue for your reported problem. Any development will be reflected there.

https://github.com/Duet3D/PanelDueFirmware/issues/180

mfs12 created this issue in Duet3D/PanelDueFirmware

closed Popup for setting temperatures is not modal #180

[dc42]

@oozebot AFAIR that is normal and deliberate behaviour since before version 1.24. You don't have to close a popup dialogue in order to change page. The popup dialogue will be cancelled automatically.

[oozeBot]

My mistake.. I guess there isn’t a cancel button, so it shouldn’t be modal, but switching tabs when accidentally clicking elsewhere felt off. Surprised I hadn’t run across this before.

Perhaps it can be considered for an enhancement. Thanks

[resam]

Is it just me, or is the Babystep button on the Setup page a few pixels to low in Y-axis?
(thick straight red lines added via photo edit app on top of a smartphone photo)

PanelDue v2 5.0

All the other buttons seems to be nicely aligned in rows and columns, but this one is off... Happy hunting!

[mfs12]

Hey @resam, thanks for reporting. I created an github issue which will reflect any further development on this topic.

https://github.com/Duet3D/PanelDueFirmware/issues/181

mfs12 created this issue in Duet3D/PanelDueFirmware

closed Correct alignement of baby step button on setup #181