Release Notes 3.4.1-pre1

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

• M291 S3 message not cleared
• Fix m291 jogging axes shown
• Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
  • https://github.com/phoboslab/qoi/

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1-pre1

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

Hey guys,

is this the final release candidate? You tell me...

Have a good start into the week...

Release notes and firmware images as usual on github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc4

Hey,

to improve the input shaping calibration experience we want to introduce the Input Shaping Plugin. So far it is a standalone but might get merged into DuetWebControl at later point.

It is based on DWC's Accelerometer Plugin and brings the following features:

• setting parameters for recording accelerometer profile
• start recording accelerometer profile
• automated download and analysis of the recorder profile
• preset of ringing frequency with the maximum amplitude
• setting of input shaping parameters

As this plugin is still in an early stage any feedback, bug reports, feature requests or wishes is helpful. So don't hesitate and leave a comment. Enjoy printing...

Release Notes inputshaping-plugin-0.1.0-rc2

Features

• setting parameters for recording accelerometer profile
• start recording accelerometer profile
• automated download and analysis of the recorder profile
• preset of ringing frequency with the maximum amplitude
• setting of input shaping parameters

Bugs

Downloads

Downloads can be found at https://github.com/mfs12/DuetWebControl/releases/tag/inputshaping-plugin-0.1.0-rc2

Link to the github issue. Any development done on this topic will be reflected there.

https://github.com/Duet3D/PanelDueFirmware/issues/132

mfs12 created this issue in Duet3D/PanelDueFirmware

closed Macro buttons are not displayed in some cases #132

Hallo,

here a new official version of PanelDue.

Special thanks goes out to @Fred-Y, @cosmowave, @Aitor, @RomanVin who helped me to review and fix most translations.

Release Notes 3.4.0

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

• add cross-platform headless builds based on cmake
• cleaned up dim/screensaver handling
• removed compiler warnings
• enabled Russian localization by default
• enabled Ukrainian localization by default
• improved list-locales tool for translation debugging
• fixed displaying of M291 S2 and S3 if followed by M292
• fixed displaying macro buttons in control tab
• fixed setting of serial baud rate after reboot
• cleaned up English
• cleaned up Czech translation
• cleaned up French translation
• cleaned up German translation
• fixed access to second sd card
• cleaned up Russian translation
• fixed persistent pressed button handling in some dialogs
• fixed updates via RRF
• fixed displaying of multiple heaters per tool
• improved readme
• fix brightness handling during pop-ups
• disabled spammy debug information
• show babystep button if printer is idle
• cleaned up Spanish translation
• change default feedrates
• extend m291 popup to allow movement of other axis, up to 10
• updated RRFLibraries
• fixed babystep button alignment in setup tab
• moved popup code into separate module
• show connection loss in status
• show warning when more than 2 malformed successive request responses are received
• log status changes console
• add support for ccache to speed up compilation

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.0

Flashing instructions can be found at https://duet3d.dozuki.com/Wiki/PanelDue_Firmware_update

Hey,

new version of Paneldue Firmware was released.

Release Notes

This release requires RepRapFirmware 3.3 or later.

Version 2 (after August 2016) and Version 3 PanelDue are supported.

3.4.1-pre1:

• M291 S3 message not cleared
• Fix m291 jogging axes shown
• Add support for QOI thumbnails in gcode files (supports one QOI image with max size 160x160)
  • https://github.com/phoboslab/qoi/

3.4.1-pre2:

• improved file detail popup layout
• use faster stack size calculation when not debugging
• updated RRFLibrary
• added CRC16 to gcode request
  • by default CRC16 is enabled
  • added option to disable checksum and CRC16 in gcode requests
• improved m291 jogging layout
• fixed m291 axis selection handling

3.4.1-pre3:

• fixed babystep button handling
• added polish translation
• update RRFLibraries

3.4.1:

• fixed babystep button handling

Downloads and flashing instructions:

Binaries can be found at https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.4.1

Flashing instructions can be found at https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue

Hallo,

a new version of PanelDue Firmware was build and released.

This is still a release candidate which means it is not officially declared stable. So if you find any bugs please report them here in this thread.

Otherwise enjoy peaceful printing...

Firmware images and release notes can be found on github. Just follow the link below.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc1

Hey,

a new release candidate is available. No bug fixed but new features.

Release notes and firmware images can be found on github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc5

Hey guys,

here's the next release candidate.

Hopefully all bugs reported are fixed.

For details and download please visit github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc2

Please re-test with the following release...

https://forum.duet3d.com/topic/32532/paneldue-firmware-3-5-0-rc6-released

@wschadow can you show also the upper folder structure?

It might be related, as this in a sub folder.

Does this also happen in the top folder?

Hallo community,

the brand-new official major release 3.5.0 for PanelDue is available!

Detailed release notes and image downloads can be found on github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0

If you find any problems please report them here.

Detailed flashing/update instructions can be found at https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_PanelDue

Cheers and happy printing...

Hey @achrn,

so about you ip address issue.

Paneldue displays only the ip address of the first (index 0) network interface.

In SBC mode currently in any case the RRF's ip address of interface 0 is displayed which is in SBC mode always 0.0.0.0 as the SBC handles the ip connection.

In future this might change that the OM request is forward to SBC which then reports back the SBC's ip address.

If you feel eager to request a more sophisticated ip address displaying feel free to drop a feature request in the forum.

I hope this helped you.

@achrn the missing IP addr might be due to SBC mode. I am clarifying this.

@blt3dp said in PanelDue Firmware 3.5.0-rc9 released:

Just posted this on the github as a bug but I'm runing the same setup as achrn and I'm not seeing the macros on the right on the main screen. clicking macros shows nothing, and clicking the sd card icon doesn't show my gcodes

Hey, i can't reproduce it. Everythng shows up as expected. Is there a problem with your folder structure on the sd card? do you have some unusual folder nesting?

@achrn said in PanelDue Firmware 3.5.0-rc9 released:

On a MB6HC (MB6HC) with a SBC with nice new Bookworm 3.5.1 should the IP address in Setup be correct? Mine is showing 0.0.0.0. The object model has it correct - network.interfaces[0].actualIP showing 192.168.52.38. (I can't remember if it was showing correctly before.)

so there's a little caveat when in setup tab paneldue does NOT communicate with RRF, therefore if switched to early into setup tab, the ip addr might still show 0.0.0.0 (not connected) although RRF has meanwhile connected.

So after RRF is connected and then entering setup tab everything should be displayed as expected.

@blt3dp @achrn I will have look into it.

Hey guys,

a new and likely last release candidate.

As usual release notes and downloads can be found on github.

https://github.com/Duet3D/PanelDueFirmware/releases/tag/3.5.0-rc9

Please report any problems here. And if things will run smooth next week there will be the official 3.5.0.

Cheers and happy printing...

will be released with 3.5.0-rc9.

https://github.com/Duet3D/PanelDueFirmware/issues/332

Braintoe created this issue in Duet3D/PanelDueFirmware

closed SD card file list does not update correctly when deleting a file if files spread across more than one page #332