Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 2 Wifi issue. Wont connect after high voltage warning

    Scheduled Pinned Locked Moved
    Using Duet Controllers
    4
    21
    677
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Phaedruxundefined
      Phaedrux Moderator
      last edited by

      Do you see any damaged components on the board? Can you post some photos? Do you have any idea what the high voltage event could have been? Did the PSU fail? Did something get shorted?

      Z-Bot CoreXY Build | Thingiverse Profile

      Justin 0undefined 1 Reply Last reply Reply Quote 0
      • Justin 0undefined
        Justin 0 @Phaedrux
        last edited by

        @phaedrux I dont see any damaged comonets on the boar. I'll attach some images.

        The high voltage warning came from the duet at 31.4V. It could have come from the power supply. It came from an ender 3. I don't think the PSU has failed. I will have a multimeter later today and check output voltages.

        I don't think any items got shorted and there was no sounds of shorting. IMG_8950.jpg IMG_8949.jpg IMG_8948.jpg IMG_8947.jpg

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          I'd suggest taking it out completely, disconnecting everything, and checking with just usb connected again. Get some well lit close up shots.

          Z-Bot CoreXY Build | Thingiverse Profile

          Justin 0undefined 2 Replies Last reply Reply Quote 0
          • Justin 0undefined
            Justin 0 @Phaedrux
            last edited by

            @phaedrux Okay will do. Just checked PSU voltage, its 24v. Measured it 10 times, 1 a min. range was 23.8-24v

            1 Reply Last reply Reply Quote 0
            • Justin 0undefined
              Justin 0 @Phaedrux
              last edited by

              @phaedrux Connecting the board via USB with not connections has it working like it was new out of the box

              dc42undefined 1 Reply Last reply Reply Quote 0
              • dc42undefined
                dc42 administrators @Justin 0
                last edited by dc42

                @justin-0 when RRF reports that the VIN voltage is abnormally high, it usually means that the 3.3V rail voltage is low because the ADC uses the 3.3V rail as the reference. Typically this means that the 3.3V rail is overloaded, either by an external device or by an on-board device. So check whether any components are getting hot, in particular the 3.3V regulator, the SD card, the WiFi module, and the main processor.

                If nothing is getting hot, reconnect VIN power and see whether VIN is still reported as being abnormally high.

                Duet WiFi hardware designer and firmware engineer
                Please do not ask me for Duet support via PM or email, use the forum
                http://www.escher3d.com, https://miscsolutions.wordpress.com

                Justin 0undefined 1 Reply Last reply Reply Quote 1
                • Justin 0undefined
                  Justin 0 @dc42
                  last edited by

                  @dc42 @Phaedrux Nothing gets hot when connected over USB. I'm connected to the PSU and the board is working with not issues (I have power cycled everything a few time to make sure). Vin is reported at 24.3 by the board and 23.8 by multimeter. I don't have time to reassemble printer today, but will do that tomorrow port by port to make sure the board will still function. I appreciate your help!

                  1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined
                    Phaedrux Moderator
                    last edited by

                    Something may be shorting out then. Slowly add back things one at a time to see if you can find what it was. Hopefully nothing got fried.

                    Z-Bot CoreXY Build | Thingiverse Profile

                    kb58undefined 1 Reply Last reply Reply Quote 0
                    • kb58undefined
                      kb58 @Phaedrux
                      last edited by kb58

                      @phaedrux said in Duet 2 Wifi issue. Wont connect after high voltage warning:

                      Slowly add back things one at a time to see if you can find what it was.

                      ^This. Best practice is to plug in each connector with power off, turn it on briefly and read the voltage or watch for the error message, quickly shutting it off if there's a problem. It's now been isolated to whatever cable was plugged in last, so unplug the far of that cable, and power up the board again. If the problem reoccurs, it's in the cable, and if not, it's in whatever that cable connects to.

                      Scratch-built 350mmx350mm coreXY, linear rails, ballscrews, 3 Z axis, Duet3 6HC, v3.3, Tool Board v1.1, BondTech LGX + Mosquito hot end

                      1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator
                        last edited by

                        Also, let your eyes do some testing first. Look for signs of scorching or browning on connectors and components and wires.

                        Z-Bot CoreXY Build | Thingiverse Profile

                        Justin 0undefined 1 Reply Last reply Reply Quote 0
                        • Justin 0undefined
                          Justin 0 @Phaedrux
                          last edited by

                          @phaedrux I started adding items back one at a time. It looks like the PT1000 (thermistor and probe) and the BLTouch no longer work but everything else does. My guess is that one of the two could be the cause of the issue that I was having.
                          Thanks for the help everyone!

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA