Filaments

schneik80 · 2 Sept 2017, 18:42

I have two filaments defines and have created load.g and unload.g macros for each.
I have verified I only have one extruder in the tool definition.

I can not get the Web ui to present the sub menu to select Filaments from tool1.
I can manually send M701 and M702 and load an unload filaments

Any tips on why the web ui menus are not showing the filament selection UI?

dc42 · 3 Sept 2017, 10:35

Confirm you are running firmware 1.19 or later and DWC 1.19?

schneik80 · 3 Sept 2017, 15:17

Yes. I am using the latest release.

dc42 · 3 Sept 2017, 17:41

That's one for chrishamm to look at then.