Filaments

schneik80

I have two filaments defines and have created load.g and unload.g macros for each.
I have verified I only have one extruder in the tool definition.

I can not get the Web ui to present the sub menu to select Filaments from tool1.
I can manually send M701 and M702 and load an unload filaments

Any tips on why the web ui menus are not showing the filament selection UI?

dc42

Confirm you are running firmware 1.19 or later and DWC 1.19?

schneik80

Yes. I am using the latest release.

dc42

That's one for chrishamm to look at then.