Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 Tool Board not resetting?

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    toolboard reset duet3 6hc
    2
    4
    418
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • hekiundefined
      heki
      last edited by

      Hi all,

      I've recently gotten a Duet 3 Tool Board and it seems like when I power it on using 18V power supply, the status LED blinks in red, indicating it is running but not connected to the motherboard. However, when I try to reset it by pressing button 0 and button 1 during power on, the red light keeps blinking without showing any signs that it is resetting. Is it the board being faulty?

      Thank you!

      dc42undefined 1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators @heki
        last edited by

        @heki see https://duet3d.dozuki.com/Wiki/CAN_connection#Section_LED_behaviour_and_error_codes for what the flashing LED signifies.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        hekiundefined 1 Reply Last reply Reply Quote 0
        • hekiundefined
          heki @dc42
          last edited by

          @dc42 Thanks for the reply, I figured because the LED is continuously blinking, the "board is running but does not have CAN communication with the main board". But shouldn't it momentarily stop blinking when it's being reset?

          dc42undefined 1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @heki
            last edited by

            @heki said in Duet 3 Tool Board not resetting?:

            @dc42 Thanks for the reply, I figured because the LED is continuously blinking, the "board is running but does not have CAN communication with the main board". But shouldn't it momentarily stop blinking when it's being reset?

            To reset the board to default settings, have to power up the board while holding both buttons down.

            When you power up a Duet system, the LED on the tool board should blink rapidly at first, then slow down to match the blinking on the main board.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA