Haydn Huntley’s Magball delta arms
-
I would like to get some Haydn Huntley’s Magball delta arms of 450mm/500mm for a delta of 500mm horizontal extrusion and 1200mm vertical.
I do not know how to get in touch with Haydn Huntley´s.Wiki link is not a page to shop.
You could make the arms thicker for those dimensions?
Would these arms be correct for those printer splices considering that I need at least 300mm in bed?
Thank you -
Try posting in the following thread https://groups.google.com/forum/#!topic/deltabot/485cfVFrFFU%5B526-550%5D
-
thank you very much, Dougal1957.
-
Or email him directly at haydn.huntley@gmail.com
-
fwiw I am using 360mm rods on a 300mm bed, if you're around 300mm diameter bed wise, you're way overshooting arm length required.
-
mine is 500 horizontals with a 360mm Diam bed and my arms are 450 long from haydn and they are about right could possibly have got away with 440 but I would rather go slightly longer than short
-
Dougal, were your arms made with the 6mm O.D. rods or does he offer larger diameter for that length?
-
He can do 10mm Carbon mine are 6 (in fact there just under) but are stiff enough.
The 100mm puts quite a price hike and he also has to but it in specially I believe.
