Thermistor Wrong Temperature
-
Good Morning together!
I have a "Hisense 3950 1%..." Thermistor in my Hotend and configured this with T10000.
But then it always shows -0.9 - 2+CIf i would configure T100000 (one more 0) i get the same Temperature like the Thermistor in the Heated Bed (Room Temperature ~22C)
Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3 (2021-06-15)
Version von Duet WiFi Server: 1.26Is this a Bug or did i made a Mistake here?
-
@xenon2008 mistake. it should be T100000 as its a 100k thermistor
-
@jay_s_uk but if i look in the Config Tool. and choose "Hisense" i get T10000 B4100
-
@xenon2008 whats the full description of your thermistor?
-
@jay_s_uk Thermistor 13 - 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" // R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, Hisens thermistor
That is that what i chooose in the Config RepRap Tool & what Mellow on Ali wrotes in the Description
-
@xenon2008 there you are then. its a 100k thermistor and not the same as the one in the config tool
-
@jay_s_uk okay i understand thanks!
Mellow excactly wrotes: HTNTC Thermistor Cartrodge (choose 13 in marlin firmware)X 1
And 13 is :
Thermistor 13 - 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" // R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, Hisens thermistorand in the Description in the RepRap Configtool also stands "100kOhm"..
